So when you say ignition switch do you mean the plastic one that goes on Colum or the cylinder key part?I agree, turn key to 'on' position, don't need to start engine, push the window switch, if no worky hold switch while 'jiggling ' key,
Same basic wiring since the started putting 12 volt charging systems but it worked, stop comparing automotive systems then and now, we can still fix our cars.Well let's face it. Fox wiring is "barely adequate" from nose to tail.
Same basic wiring since the started putting 12 volt charging systems but it worked, stop comparing automotive systems then and now, we can still fix our cars.
Most times the door switches just need cleaning or has a loose connection.
Our beloved foxes had a recall on them plastic ign.switches, some of us use zip ties to hold them together for awhile,but they are cheap enough to just replace.
WUT???Update! lol still haven’t had time to get in there but car starting tooff on me. Happened at the light juat barley left the house cat wasent even warm yet lol.
That is a Fox body direct to power source connection. I think the part number is FK0001D9005UP. If it has a white nib by the prongs, it is from 1990–1993 and the part number is Fi0001RE9005Y.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?