90 GT Can't Open Hatch

eweezy

New Member
Jul 5, 2008
6
0
1
Hi all, I just bought a 90 GT and cannot open hatch. Key just spins around and hatch popper switch is working correctly but actuator in back must not be. Is there anyway to open hatch? Thanks
 
You can drill out the rivets on the holding clamp for the lock. They are located under the lip inbetween the license plate light. Then pull clamp down, then the lock will slide out. After that
put a long skinny flat blade screw driver into the lock mech. and try turning it.
 
just crawl inside the trunk through the drivers door, and take a flat head screwdriver with ya, and turn the little round know in the hatch latch, should open then, probally just needs a little bit of oil.
 
SUCCESS!

Thanks to all, I got into my hatch. I unbolted all 4 screws holding the latch to the trunklid and it open. Found out my problem was 2 fold. First, trunk lod rod was not in latch assembly. Second, there is no bushing on striker bolt. Cleaned and lubricated latch assy and used a few layers of electrical tape around striker bolt. Thing opens and closes, just need to get real bushing to put on striker so it doesn't rattle. THANKS TO EVERYONE!
 
Get that bushing soon. I had the electrical tape thing going for a few days too. Then everytime I hit a bump, my hatch popped open. Scared me the first time it happened at night. I heard a pop and then the dome light started flashing.
 
im having a problem w/ my 93 hatch. when i press the hatch release button it doesnt pop the hatch. i need someone to lift the hatch while im pressing the button. i hear the hatch release motor working, anybody have this problem?