• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

90 gt PLEASE HELP!!

  • Thread starter Thread starter projectfiveo
  • Start date Start date Oct 9, 2005
P

projectfiveo

Member
Aug 30, 2005
347
0
17
Oct 9, 2005
#1
  • Oct 9, 2005
  • #1
ok i have a 90 mustang gt with 3:73 gears, 155lph fuel pump, bbk cold air, flowmasters, smog pump removed, msd cap and rotor, msd coil, 9mm ford racing wires, and i have some underdrive pulleys on the way....now with them i wasnt going to put the alternator pulley on cause i didnt want to upgrade my alternator, but ive heard that pulley helps out alot??? is that true?? and my big question is what can i do next besides putting a new intake or heads?? im kinda on a budget for a while....i planned on bumping my timming to 14 and bypassing my ac with a shorter belt...but what else? ohh yeah someone told me to take the two black hoses that run into the throttle body spacer and hook them together, have you all ever heard of that??
 

mattkimsey

I've compiled a list to recap this thread:
Jan 22, 2004
346
0
0
Bessemer City NC
Oct 9, 2005
#2
  • Oct 9, 2005
  • #2
You could try the pully, I believe most people don't have a problem.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 9, 2005
#3
  • Oct 9, 2005
  • #3
What exactly are your goals? Do you run at the track, or street only?

Unless you have a big stereo or other aftermarket electric accesories then go ahead and do the alternator pulley, it does make a difference. Upgrading to a 3G isn't expensive and is a big improvment on any vehicle with a dreded 2G alternator.

What do do next? If you want more HP then you could do a MAF, when I had similar mods like you have I noticed a gain with a C&L 76mm, had the 73mm first but took it back because I found a better deal on a 76mm, but noticed no gain between them. Electric fan is a good one but running an electric fan wth a stock alternator, u/d pullies or not, usually ends up with a dead alternator. Replacing the stock 4 cat H pipe with a O/R H/C/PC pipe would increase power and improve sound, but IMO, might as well do headers at tha point and I belive in longtubes. If you would like to improve handling and ride quality, do the subframe connectors, a very worthwhile modification. If you want to put a big difference in handling, do a set of rear upper and lower controll arms, the stock mustang rear suspension really, sucks, makes the cars almost dangerous when pushed hard.
 
T

Topdowncruise

New Member
Apr 7, 2005
207
0
0
Canada
Oct 9, 2005
#4
  • Oct 9, 2005
  • #4
I left the stock alternator pulley on.I have a newer 75 amp (OEM) alternator and just didn't think it was worth the risk of a dead battery.Headers and an offroad pipe might hurt your low end torque at this point.
 
P

projectfiveo

Member
Aug 30, 2005
347
0
17
Oct 9, 2005
#5
  • Oct 9, 2005
  • #5
so i should be fine with the alternator pulley then?? and its a weekend driver car, but i would like it to run good enough to keep up with some camaros! so if anyone knows any little hidden HP secrets let me know!! cause i have a date with a z28 with 4:10's this weekend! lol
 
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
Oct 9, 2005
#6
  • Oct 9, 2005
  • #6
you can bypass the throtle body lines. There actually heating up the air thats going into your intake. All you need to do is buy some new hose and run it from one outlet to the other.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 9, 2005
#7
  • Oct 9, 2005
  • #7
Z28 + 4.10's, Date rape more like, I think when you dance, your not going to lead, but what year Z28? I don't know any secrets that's going to help a lot.

Just don't turn the A/C on, it takes no more power than the tensioner that way, but it does add some weight. I used to bypass the P/S, noticed a gain there. Now I only have an alternator, P/S, A/C, smog pump, are all gone, electric fan and waterpump, only accesorie is the 3G alternator on a 3" crank pulley.
 
P

projectfiveo

Member
Aug 30, 2005
347
0
17
Oct 9, 2005
#8
  • Oct 9, 2005
  • #8
ok snoboardcore is that the two black hoses that run in on both sides of the throttle body spacer right before it connects to the intake manifold?? someone else told me about that but i was afriad to do it?? and im sure i could get that hose at a part store couldnt i?
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 9, 2005
#9
  • Oct 9, 2005
  • #9
snoboardcore said:
you can bypass the throtle body lines. There actually heating up the air thats going into your intake. All you need to do is buy some new hose and run it from one outlet to the other.
Click to expand...

I did that once, it looked like crap so I just cut them off and plugged them at the source. Yes it does keep your intake cooler. The cooling lines are suposed to help cool EGR gasses, but in reality when your on the throttle, the EGR is closed.
 
P

projectfiveo

Member
Aug 30, 2005
347
0
17
Oct 9, 2005
#10
  • Oct 9, 2005
  • #10
its a 96 or 97 z28 i think, it also has cold air, and he has used one of those hand programers on it?? i could beat it easy before the gear but i dunno now! lol
 
P

projectfiveo

Member
Aug 30, 2005
347
0
17
Oct 9, 2005
#11
  • Oct 9, 2005
  • #11
90mustangGT said:
I did that once, it looked like crap so I just cut them off and plugged them at the source. Yes it does keep your intake cooler. The cooling lines are suposed to help cool EGR gasses, but in reality when your on the throttle, the EGR is closed.
Click to expand...


ok well where did you get a big enough hose to fit it? or i guess i could use some tape to connect them! lmao...and did it do ok for you?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Oct 9, 2005
#12
  • Oct 9, 2005
  • #12
projectfiveo said:
ok snoboardcore is that the two black hoses that run in on both sides of the throttle body spacer right before it connects to the intake manifold?? someone else told me about that but i was afriad to do it?? and im sure i could get that hose at a part store couldnt i?
Click to expand...


Ugh oh, the great EGT coolant hose debate. There have been many heated arguments over these hoses.

In reality, no matter what you do to them you aren't going to gain a single HP so I would just leave them alone.


As for the pulleys, look into an ASP Overdrive alt pulley. Get the 1 7/8" one. It should compensate for the underdrive crank pulley
 
P

projectfiveo

Member
Aug 30, 2005
347
0
17
Oct 9, 2005
#13
  • Oct 9, 2005
  • #13
Mustang5L5 said:
Ugh oh, the great EGT coolant hose debate. There have been many heated arguments over these hoses.

In reality, no matter what you do to them you aren't going to gain a single HP so I would just leave them alone.


well my buddy did that and he said he could feel a difference??? but i dunno....do you know any other things to unplug or hook together, he has like 4 other simple things done....but hes in mississippi now and i cant get ahold of him
Click to expand...
 

mattkimsey

I've compiled a list to recap this thread:
Jan 22, 2004
346
0
0
Bessemer City NC
Oct 9, 2005
#14
  • Oct 9, 2005
  • #14
projectfiveo said:
its a 96 or 97 z28 i think, it also has cold air, and he has used one of those hand programers on it?? i could beat it easy before the gear but i dunno now! lol
Click to expand...
You shouldn't have much problems.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Oct 9, 2005
#15
  • Oct 9, 2005
  • #15
projectfiveo said:
well my buddy did that and he said he could feel a difference??? but i dunno....do you know any other things to unplug or hook together, he has like 4 other simple things done....but hes in mississippi now and i cant get ahold of him
Click to expand...


Remove the silencer. That's about the only free mod there is on the 5.0

the coolant hoses do nothing trust me
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 9, 2005
#16
  • Oct 9, 2005
  • #16
I'll say this, when I first did it I can't say it made much difference but the intake did stay cooler. I had to pull my intake once so I put the block off plate that came with the gasket set and the intake stayed much cooler. It's one of those things that probally helps more than hurts, and every little bit helps.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Oct 9, 2005
#17
  • Oct 9, 2005
  • #17
All I can add is my own experience on this..I run on a tuff stuff 75amp alt purchased this yr..every cable is new and connections are solid. As for stereo I run just a pioneer deck and 200 watt bazooka tube...really just basic low usage system. With UD pullies I find I am 12-12.5 at idle. That is too low in my opinion...the situation is even worse should I turn on my lights, fan etc...then I go right out of charging and start draining the battery...I will recomend not using the UD alt pulley. The HP lost will be far less than noticable if any at all.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 10, 2005
#18
  • Oct 10, 2005
  • #18
On a budget? do the junkyard upgrade...

Gears - 87-88 T-Bird Turbo Coupe rear axle - disc brakes and 3.55 or 3.73 gears in one package for $125-$300. Add another $100-$200 or so to complete the brake upgrade.

94-95 Mustang GT MAF - $40-$100. It is 70 MM instead of the stock 55 MM on regular stangs built prior to 94. It uses a slip on duct on the side that goes to the throttle body and a 4 bolt flange on the other. You need a $25-$35 flange adapter from Pro-M to fit the stock slip on air ducting that goes to the air box. Wiring plugs right in with no changes. *1

95-97 Ford Explorer intake manifold & throttle body $150-$300. The intake manifold flows 220 CFM +, much better than stock. Throttle body is 65 MM, bigger than the 60 MM on stock stangs. I got a 96 with EGR passages that match the stock setup, so my smog gear works just like factory. You’ll need a 65 MM EGR spacer & new gaskets for $65-$90 so you have a place to mount the EGR & throttle linkage.

3G alternator from 94-95 Mustangs or other Ford. $20-$120. A must have to make the electrical system work like it should. You’ll need a 4 gauge power wire and a 125-135 amp fuse to go with it about $15- $30.

Lincoln MK VIII electric fan -$40-$160. Free up some HP by not having to drive the stock fan. The 3G alternator upgrade is a must have prerequisite before you do the MK VIII fan. You won’t have enough electrical power if you don’t do the 3G upgrade.



*1.) I got a metal flange adapter from Powered by Ford for $35 and tax. That was over a year ago. Summit Racing may also have one too.

Powered By Ford
1516 South Division Avenue
Orlando, FL 32805
Hours 0800-1800
Phone 407-843-3673
http://www.poweredbyford.com/
 
You must log in or register to reply here.

Similar threads

O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
519
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
596
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
A
Resolved Electrical Help Please
  • Alabama
  • Jan 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
374
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 22, 2026
AeroCoupe
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
H
Vortech V1 Idler Pulley Newedge
  • HIGHMILE2V
  • Sep 12, 2024
  • The Welcome Wagon
Replies
3
Views
651
The Welcome Wagon Sep 13, 2024
HIGHMILE2V
H
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?