I have looked for that plug my guess is it has been cut off at some point gonna have to find a donor car so I can get that plug and wire it in myself and the wiring diagram is a huge help thanksLook for the shape of this connector. Nothing should be plugged into it. It's nothing in your pics.
I see a few cut off wires. Why would anyone cut anything off?
Will do thanks againYou gotta find an old Ford in a junkyard.
If you do, use this splice:
Heat Shrink Solder Sleeve Butt Splice Wire Connector Waterproof
I do not suggest using these anymore after I had multiple failures and was forced to open my wiring harness and replace every one of them. The solder joint would brake and give an intermittent connection, I simple use a cold weld connector and heat shrink all connections now.You gotta find an old Ford in a junkyard.
If you do, use this splice:
Heat Shrink Solder Sleeve Butt Splice Wire Connector Waterproof
I've always hand soldered and heat shrinked all my connections, what are these "cold weld connectors" you speak of?I simple use a cold weld connector
a compression connector [typical butt splice] when properly applied is considered a cold weld joint.I've always hand soldered and heat shrinked all my connections, what are these "cold weld connectors" you speak of?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?