93 Lincoln 302 block same as 89 mustang 302

Chietala

New Member

Sep 21, 2006

111

0

0

Sacramento

Jan 29, 2007

#1

• Jan 29, 2007

• #1

Got the call from the machine shop today. Block is cracked in more than 10 places. (Thanks to the Montana sub-zero temps.)

I know a guy who has a 302 from a 93 lincoln but Im not sure if this is a roller block?? I know the ford trucks werent roller until 93 but I'm not to sure about Lincoln's.

Anyone know if this will work??
Also are they E'7 heads?

Thanks!!

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

3

58

Port Elgin, Ontario

Jan 29, 2007

#2

• Jan 29, 2007

• #2

I think they are the same engine...there is a lincoln mark sunthin in a local JY and it is a 5.0 HO and it is the exact same as the one in my car.....even S/D.

 

W

wazazzle

New Member

Mar 30, 2005

618

1

0

In the dumpster behind McDonalds. WA

Jan 30, 2007

#3

• Jan 30, 2007

• #3

it's a roller block. but the upper intake is the same as the 94/95 mustang 5.0 ho. i only know because i pulled one out of a 93 lincoln vii. unless of course whoever owned it before swapped it in and i could be totally wrong. you might also want to find out about what type of pistons they have on that 93 vii.

 

Chietala

New Member

Sep 21, 2006

111

0

0

Sacramento

Jan 30, 2007

#4

• Jan 30, 2007

• #4

wazazzle said:

it's a roller block. but the upper intake is the same as the 94/95 mustang 5.0 ho. i only know because i pulled one out of a 93 lincoln vii. unless of course whoever owned it before swapped it in and i could be totally wrong. you might also want to find out about what type of pistons they have on that 93 vii.

Click to expand...

All I'm going to be using is the block. I just havent seen it to see if it's roller or not. Do you know what heads are on it??

 

bullitstang1313

Member

Jan 21, 2003

713

0

16

Indianapolis / Columbus, Indiana

Jan 30, 2007

#5

• Jan 30, 2007

• #5

Do you know what Lincoln model it came out of? Some of the Lincoln's used the H.O. motor while others were the standard output. It is a roller block, but the intake, heads, and internals are different depending on if its a H.O. or not.

 

stangster50

New Member

Nov 19, 2006

129

0

0

cranston ri

Jan 30, 2007

#6

• Jan 30, 2007

• #6

wazazzle said:

it's a roller block. but the upper intake is the same as the 94/95 mustang 5.0 ho. i only know because i pulled one out of a 93 lincoln vii. unless of course whoever owned it before swapped it in and i could be totally wrong. you might also want to find out about what type of pistons they have on that 93 vii.

Click to expand...

do years matter in this case? because they did not make a 93' mark vii (7) in 93 the mark viii (8) came out. which has a 4.6 dohc in it. just thought i would point this confusion out in case it tell you if its a roller or not.

 

bullitstang1313

Member

Jan 21, 2003

713

0

16

Indianapolis / Columbus, Indiana

Jan 30, 2007

#7

• Jan 30, 2007

• #7

The year and model will matter if you are want to know what heads and intake the engine is equipped with. If you just want the block, then its not as important.

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jan 30, 2007

#8

• Jan 30, 2007

• #8

all the way up til 92 were 5.0L's
93 is not a 5.0L, its a 4.6 mod motor, because it would be a MarkVIII not a MKVII......
Ant

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jan 30, 2007

#9

• Jan 30, 2007

• #9

Only diff between MKVII 5.0's is speed density not mass air..... averything is the same............ roller motor 86-92. 86 being flat top pistoins no valve reliefs.

 

M

MustangGT95

New Member

Jul 29, 2003

407

1

0

Jan 30, 2007

#10

• Jan 30, 2007

• #10

Anyone know what heads came on a 302 f150? My motor/heads are from a f150 but I know it is a roller motor. Was wondering if it has e7's or something worse.

 

Chietala

New Member

Sep 21, 2006

111

0

0

Sacramento

Jan 30, 2007

#11

• Jan 30, 2007

• #11

MustangGT95 said:

Anyone know what heads came on a 302 f150? My motor/heads are from a f150 but I know it is a roller motor. Was wondering if it has e7's or something worse.

Click to expand...

As far as I know in 93 they went to Roller motor 1 piece rear main and E7's

 

W

wazazzle

New Member

Mar 30, 2005

618

1

0

In the dumpster behind McDonalds. WA

Jan 30, 2007

#12

• Jan 30, 2007

• #12

stangster50 said:

do years matter in this case? because they did not make a 93' mark vii (7) in 93 the mark viii (8) came out. which has a 4.6 dohc in it. just thought i would point this confusion out in case it tell you if its a roller or not.

Click to expand...

stangster you are right, i stand corrected. the mark viii came out in 93 for some reason i always thought it was 94. then the 5.0ho motor was in a 93 continental i pulled.

 

Chietala

New Member

Sep 21, 2006

111

0

0

Sacramento

Feb 3, 2007

#13

• Feb 3, 2007

• #13

Ok so I found out It is a 92 roller block. Not sure yet if the heads are E7's. Havent seen them yet.
When I checked the pistons for ring positon I found that they both have valve reliefs, The top ring is in the same position, the GT piston is forged and the lincoln is cast. I found they also changed the casting letter in the 90's to an F! 80's blocks are E castings while 90's are F's.

Thanks for the input guys I'll let you know if there E7's as well.