93 Radio Install.......Oh Lord !!!!

Ok....my car has an older Apline unit that will power up but has no sound. I am replacing it with a newer model with Bluetooth capabilities. The wiring was a jumbled mess to be sure.




Here are the connectors currently inside my console area. Of course the Black point plug is the antenna and the black ( 6 wires) powers up the unit. There is no plug for the smaller blue wire connector on the older radio Or new radio pictured below.



This Connector was plugged into the gray connector on the old radio. I did notice the wire color between the 2 plugs did not match but it did intact power up the radio




Here is the back of the new Pioneer radio DEH-S6220BS with Bluetooth.



I know the ...

Yellow = memory, clock, presets
Red = ignition
Black - ground
Orange/White = auto dim
Blue = Remote Control
Whites = LF
Gray = RF
Green = LR
Purple = RR



So the radio came with 2 Metra 70-1770 wiring Harnesses to make it semi plug and play with the 93 Mustang. The first one seems to be the Memory, Ignition, Dimmer, Ground, and Remote? I’m guessing only the red, black, and yellow are need to make the radio operate correctly. Also assuming the solid orange is dimmer and solid blue is remotes



The second seems to be made for the speakers based on the colors. ??



Now there is only one connector in the console and it seems to be what powers the radio so I have no idea on how to hook up the speakers unless the speaker wiring is hid in the big blue wire/connector in the console or are the power and speakers merged into the one black connector in the console

amy help or guidance will be greatly appreciated

S1

I look under my passenger seat and it looks like the amp has been removed



Mounted to the plate that holds the airbag module I found these connectors

Ok.....I’m getting close. I got power....my BT devices connect.....just no sound from speaker. I’ve moved the connectors around every which way I can. 2 of the Connectors will supply power to the unit. I found only one that will plug into the the speaker connector on the back of the unit. Not a hint of sound, scratch, or buzz.

here is my radio...wires are soldered and heat stripped. I only left blue and orange off... believe they are for dimming and remote stuff



speaker wires soldered and heat stripped



these are the 2 connectors that are from the same harness



all hooked up





Leftover connectors



any thoughts or ideas.... gotta be something I missed or simple. Well I hope : )