94-95 Cobra mass air

5

5.0guy7

New Member

Aug 27, 2006

7

0

0

Aug 30, 2006

#1

• Aug 30, 2006

• #1

I have a 94 GT, and I was going to upgrade to 24lb injectors while I had the intake off. Can I use a mass air off of a 94-95 Cobra, what else will I need to do to make it work?
Thanks!

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Aug 30, 2006

#2

• Aug 30, 2006

• #2

the cobra meter is the same as the gt. you need an aftermarket maf or a tune to use the injectors

 

5

5.0guy7

New Member

Aug 27, 2006

7

0

0

Aug 30, 2006

#3

• Aug 30, 2006

• #3

By "tune" do you mean computer tune with a tunner or chip, or a tune of the mass air?

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Aug 30, 2006

#4

• Aug 30, 2006

• #4

a chip tuned by a tuner

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Aug 30, 2006

#5

• Aug 30, 2006

• #5

change the tune in the computer. if you get an aftermarket meter you order one for your specific year and injectors.

 

Jackie Chan

I didn't read this.

Founding Member

Oct 17, 2002

2,507

4

48

Orlando, FL

Aug 30, 2006

#6

• Aug 30, 2006

• #6

why are you upgrading the injectors? unless you have a full top end there is no reason

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Aug 30, 2006

#7

• Aug 30, 2006

• #7

Jackie Chan said:

why are you upgrading the injectors? unless you have a full top end there is no reason

Click to expand...

true. i have the whole top end and im still using 19's. hey john, nice times. how much of a shot are you running. i just picked up a dry kit and some drag radials. im hoping for similar times when i get my 60' times down a little bit.

 

Jackie Chan

I didn't read this.

Founding Member

Oct 17, 2002

2,507

4

48

Orlando, FL

Aug 30, 2006

#8

• Aug 30, 2006

• #8

150 wet... REALLY rich no timing really. now i have a wideband and just installed an strim. i should have my tuner here this week and hopefully some new sc times

 

5

5.0guy7

New Member

Aug 27, 2006

7

0

0

Aug 31, 2006

#9

• Aug 31, 2006

• #9

What I am getting ready to install is GT40 upper and lower intake and GT40P heads off of a 1997 explorer, slight port work on the heads with 1.6 RR and a cam. What cam would work best with that setup when using 3.73 gears with an AODE? Also will I be ok with stock MAF, TB and 19# injectors?

 

Jackie Chan

I didn't read this.

Founding Member

Oct 17, 2002

2,507

4

48

Orlando, FL

Aug 31, 2006

#10

• Aug 31, 2006

• #10

yes you will be ok with the stock maf to tb stuff and injectors. i know plenty of guys with the stock stuff above running deep 12's. would they improve if they swapped them? yes. but your money will be better spent on susp or tires or even better N2O

 

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Sep 1, 2006

#11

• Sep 1, 2006

• #11

Jackie Chan said:

yes you will be ok with the stock maf to tb stuff and injectors. i know plenty of guys with the stock stuff above running deep 12's. would they improve if they swapped them? yes. but your money will be better spent on susp or tires or even better N2O

Click to expand...

the 19's can handle that mild h/c/i, but it is pushing the upper limits of what the injectors can handle. i would suggest moving up to 24's especially if you take the advice to get ANY type of nitrous kit.