• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

94 GT with a 99 T-5. Works, but speedo is way off..Help!

  • Thread starter Thread starter dirtbikedoc
  • Start date Start date Aug 9, 2010
D

dirtbikedoc

New Member
Jul 21, 2010
9
0
0
Asheville, NC
Aug 9, 2010
#1
  • Aug 9, 2010
  • #1
I recently traded a dirt bike for a 94 GT 5.0 with a T5 in it. The T5 works and shifts, however the speedo reads 150 when its going about 30.

I looked at the tag on the trans housing, and I have:

XR3R-7003-DA-REP-BF
and
1352-260-051641-K1891

I found that this transmission is from a 99 Mustang v6.

I pulled the speed sensor and it looks like this:



I spun the rear wheels from under the car and counted the revolutions of the drive shaft and I have determined my car has a .373 gear in it.

What do I need to make this work? Different speed sensor? different speedo drive gear? original speed sensor from the 94?

Please help
 

GTA_V6_Mustang

Active Member
Nov 29, 2004
1,326
3
39
Miami, FL
Aug 10, 2010
#2
  • Aug 10, 2010
  • #2
well I dont know if its possible but I dont think that sensor will work for you. Your best bet would be to pull the extension housing off and swap in the correct plastic gear and speed sensor from a 94.
 
X

xherdlr

New Member
May 19, 2003
159
0
0
Hendersonville,Nc
Aug 10, 2010
#3
  • Aug 10, 2010
  • #3
GTA_V6_Mustang said:
well I dont know if its possible but I dont think that sensor will work for you. Your best bet would be to pull the extension housing off and swap in the correct plastic gear and speed sensor from a 94.
Click to expand...

So, you can switch over to manual speed gear? That will invove changing over to the old manual style. Changing over to old style speedo cable,manual gear, and cover? With parts from 89-95?
 

Last5.0

Active Member
Nov 9, 2003
404
1
26
Aug 11, 2010
#4
  • Aug 11, 2010
  • #4
Might be easier to just get a SpeedCal that just plugs in between the harness and makes it fully adjustable
 

GTA_V6_Mustang

Active Member
Nov 29, 2004
1,326
3
39
Miami, FL
Aug 11, 2010
#5
  • Aug 11, 2010
  • #5
xherdlr said:
So, you can switch over to manual speed gear? That will invove changing over to the old manual style. Changing over to old style speedo cable,manual gear, and cover? With parts from 89-95?
Click to expand...

no remember the sn isnt cable driven its electrical but the sensor itself has a plastic gear that runs on another gear on the mainshaft. So the only thing you would need is an sn speed sensor(94-95) and the plastic gear that goes on the main shaft. Or as stated before you could get a speedcal.
 
X

xherdlr

New Member
May 19, 2003
159
0
0
Hendersonville,Nc
Aug 11, 2010
#6
  • Aug 11, 2010
  • #6
GTA_V6_Mustang said:
no remember the sn isnt cable driven its electrical but the sensor itself has a plastic gear that runs on another gear on the mainshaft. So the only thing you would need is an sn speed sensor(94-95) and the plastic gear that goes on the main shaft. Or as stated before you could get a speedcal.
Click to expand...

That makes sense...Thank You!!!!
 
D

dirtbikedoc

New Member
Jul 21, 2010
9
0
0
Asheville, NC
Aug 13, 2010
#7
  • Aug 13, 2010
  • #7
Ok I ordered a speed cal and I have it here sitting in the box. I am reading over the instructions, and my first question is this: Will this work with my speed sensor that is from a 99 3.8l T5? (Trans code 1352-260) Take a close look at the sensor in the picture above. It is not the same as the 94-95 electronic speed sensor with a gear drive. You will notice that the housing is broken off, but here it is at advance auto with the housing:

Sensor - Vehicle Speed by BWD - Part SN7143 - Advance Auto Parts

There is no gear on this sensor anywhere. It is simply a magnetic halls effect sensor.

So how do I program my speedcal considering the following:
My original car was a 94 GT with a T5 and a 3.08 gear and stock tires.
My current car is a 94 GT with a T5 from a 99 3.8l a 3.73 gear and stock tires
 
D

dirtbikedoc

New Member
Jul 21, 2010
9
0
0
Asheville, NC
Aug 13, 2010
#8
  • Aug 13, 2010
  • #8
Update...apparently there is one person in the world who holds the secret code for this. And it is Justin at Dallas Mustang. I have to install the speedcal with the dipswitch on in locations 1 and 4, then reset my trip odometer, then drive for a known distance calculated by a gps or pace vehicle (min. of 10 miles) then call Justin back and tell him what my trip odometer says. From there he inputs this information into an excel spreadsheet and out comes the correct code.

Wow.
 

GTA_V6_Mustang

Active Member
Nov 29, 2004
1,326
3
39
Miami, FL
Aug 14, 2010
#9
  • Aug 14, 2010
  • #9
wow... sweet
 
You must log in or register to reply here.

Similar threads

New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
309
The Welcome Wagon Oct 19, 2025
Clutchfork
A
95 Gt intermittent backfire
  • A_A_Ron
  • May 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
429
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 26, 2025
A_A_Ron
A
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
776
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
950
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
W
Help with 95 GT
  • waynewl34
  • Apr 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
321
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?