95 5.0 Gt40p Hci Build

95ssn95 · Jun 13, 2012

Well a week after PowerTour and when I wanted to have this done, I've finally started....
Thanks to 95BlueStallion for a set of Thumper GT40p heads, custom cam, 1.72 scorpion rocker and other goodies you will be seeing soon, I am very excited to be doing more than just a bolt on this time. The plan is to have this project done by the end of this weekend. I'll continue to post everyday that I work on it, let's hope that's not too many days cuz I may start doing this....., but I suspect that if any problems do arise there's plenty of veteran knowledge 'round herr

Enough talk...... here's what i'm up to
*Built a sturdy frame to pull the motor
*Bench is loaded with parts
*Engine stand ready

*Rambo(my dog) wondering what I'm doing..
*bottom right is 460 Heads and intake from the boat(dropped a valve )

*Small work space but, it gets the job done

* Just a vid so I can remember what it sounded like b4
View attachment 148094

*Ready to tear it down

*A buddy of mine that came over to lend a hand, literally only one, haha

*This is where I am as of right now..

*Up next: Drain fluids, unbolt trans and Pull it!

Throw-back thread from when 95BlueStallion did this:
http://www.stangnet.com/mustang-for...ons-head-swap-pic-thread.816486/#post-8221308

79'293stang · Jun 13, 2012

Good luck! Any reason the engine is coming out, or is it more for convenience?

95ssn95 · Jun 13, 2012

Ah good question, because it's more fun! and yes convenience for installing the cam and to replace a squeaky throw out bearing, plus 95BlueStallion sent me a new oil pump and shaft that will be going in also.

88stang88 · Jun 13, 2012

Looks like you will be having fun my friend. I will definitely say its alot easier to pull the motor than to do H/C/I with the motor in the car still. I ran into some problems and it ended up taking me about 4 days with the motor in the car bc of minor problems i kept running into that would have been easier with it out already.

95BlueStallion · Jun 16, 2012

Cant wait to see it all together! I never had the pleasure of running that Ed Curtis cam. Just for giggles, here is a link to a video of my car with your parts runing with the stock cam. My wife and sister in law were in a rental Chevy HHR, and had it floored trying to keep up. After watching it just now, I miss that car. I did a lot of work to it over the years.

http://s298.photobucket.com/albums/mm276/Iowabiggun/?action=view&current=Mustangburnout.mp4

95BlueStallion · Jun 16, 2012

By the way, how is it coming? I just realized you started this on Wednesday, and havent updated it. I know how that goes, as you are busy working and not taking pictures and stopping to post. Gives you more respect for those that take the time to make nice progress threads, huh?

95ssn95 · Jun 18, 2012

The end of last week my attention turned to the passing of my uncle I havent done much to exciting, heads are on, oil pump and new timing chain along with that cam . should be getting the rockers bolted down and the intake on shortly. i'm thinking i may need some .030 shims, heres the progress...

screamin5oh · Jun 21, 2012

88stang88 said:
Looks like you will be having fun my friend. I will definitely say its alot easier to pull the motor than to do H/C/I with the motor in the car still. I ran into some problems and it ended up taking me about 4 days with the motor in the car bc of minor problems i kept running into that would have been easier with it out already.

4 days? lol i can do a cam swap in a few hours with it in the car. not sure why it was so hard?

Black Stampede · Jun 21, 2012

Sounds like it will be a nice setup!

RangerJoe · Jun 22, 2012

I'd like to see some pics of those heads. Show us some pics of the ports on those things. Have any idea what they flow?

Joe

88stang88 · Jun 24, 2012

Wasn't that it was hard. If you read I said I ran into more problems than expected and it would have been alot easier to fix other things with it being out of the car. Not just the H/C/I swap. Had to drill out and helicoil threads and wait for more parts that I previously wouldn't have expected to replace when doing a HCI swap

revhead347 · Jun 24, 2012

If you have a lot of little things to do, it's just easier to take it out of the car. Expecially if you have to do some helicoil work. That is back braking work.

Kurt

95BlueStallion · Jun 24, 2012

Scott, did you already get the proper length hardened pushrods? Im sure you will want a random collection of shims for under the rockers, as I remember they didnt all use the same thickness. Sorry to hear about your uncle.

Ranger Joe, the heads were ported and polished by Mike at Thumper Performance of Orange Park, FL. He did not flow them for me, but said they would flow very similar numbers to box stock trickflow 170cc heads. I am very interested to see how Scott's car runs with the combo all put together.

95ssn95 · Jun 28, 2012

Hey guys back with and update. The motor is back in. with .030 shims the rockers torqued down at about 1/4 to 3/8 of a turn, too little preload for me. the valve train sounds like poo. I ordered some 6.300 comp cam push rods. Here are some pics and a little vid just for you nick

port matching the explorer lower

a little paint

power washed and cleaned up

IN like mullets in the 80's

[URL=http://s1143.photobucket.com/albums/n640/Scott_Schulte/?action=view&current=VIDEO0026.mp4]View attachment 147583

I'll be back...[/URL]

79'293stang · Jun 28, 2012

Sounds good.

95BlueStallion · Jun 28, 2012

Yeah baby! You should get that puppy dyno tuned when you get a little extra $$$ to throw around. I really want to see what those heads are capabable of with a good cam!

95ssn95 · Jul 6, 2012

NICK! the 95 is getting a tune next Tuesday the 10th. i'm shooting for 300hp+. What do you think about that??

88stang88 · Jul 6, 2012

Kurt you nailed it! I had to do some helicoil work and a few other tedious things that required bending over the fender for a bit too long for myself.

95ssn95 · Jul 11, 2012

The car is still at Imperial Dyno . Thought it would be done by now but the chip showed up around 2pm yesterday from ups. The guy tuning it had the car idling pretty darn good but was fiddling with the IAC and TPS. Hope to get it back today.......

95BlueStallion · Jul 13, 2012

Dude, whats the latest with the car? Ive been without my laptop, and my wife's kindle wont let me respond to posts! Didnt mean to leave you hanging. Im guessing you will fall short of 300 hp to the wheels for two reasons. Your intake will hold you back, unless you ported the s hit out of it all the through each runner, and also that cam was ground for more of a flat torque curve, instead of peak hp. Your torque numbers should be great, and that is what brings the fun on the street anyway.

95 5.0 Gt40p Hci Build

95ssn95

Member

79'293stang

Active Member

95ssn95

Member

88stang88

95BlueStallion

My assy trans to myself

95BlueStallion

My assy trans to myself

95ssn95

Member

screamin5oh

Member

Black Stampede

RangerJoe

I leave the horn on while driving

88stang88

revhead347

Apparently my ex-husband made that mistake.

95BlueStallion

My assy trans to myself

95ssn95

Member

79'293stang

Active Member

95BlueStallion

My assy trans to myself

95ssn95

Member

88stang88

95ssn95

Member

95BlueStallion

My assy trans to myself

Similar threads

95 5.0 Gt40p Hci Build

Member

Active Member

Member

My assy trans to myself

My assy trans to myself

Member

Member

I leave the horn on while driving

Apparently my ex-husband made that mistake.

My assy trans to myself

Member

Active Member

My assy trans to myself

Member

Member

My assy trans to myself

Similar threads

Privacy & Transparency

Privacy & Transparency