Engine 95 gt. Vert. Cam suggestions

rockyracoon

10 Year Member
Nov 23, 2005
672
7
29
margate NJ
#1
Going with gt-40 heads, gt-40 upper and lower intake. My question is what would be a good cam with that setup and also what rockers specifically should I buy ?.
I am looking for more low end power than up top but would like to get into the mid to low 13s. I installed 410s and car has the T-45. Not looking to do any porting other than matching. Would enjoy some lope to the idle. Any cam suggestions would be appreciated.
 
  • Sponsors (?)

rockyracoon

10 Year Member
Nov 23, 2005
672
7
29
margate NJ
#3
No dont have the new springs yet. As have not yet decided on which cam to go with.
 

rockyracoon

10 Year Member
Nov 23, 2005
672
7
29
margate NJ
#4
Guess im going with a b cam or the tfs-1 with appropriate springs from A/M. Thanks for all the replies. Same old stangnet.
 

Dan02gt

10 Year Member
Mar 2, 2003
532
214
83
Greenville, NC
#5
I wouldn't recommend either of those. Your 95 needs a LSA of 114* or better to maintain good drivablity. Off the shelf wise the Steeda #19 and the Comp XE264HR-14 would work well with the Steeda being the more aggressive. You will need to upgrade the valve springs for either. I run Scorpion Endurance RRs and like them because they are low profile and fit good under stock valve covers. The Steeda cam is designed for 1.7RRs BTW.