95 GT VERT Project!!!!!

89 ST4NG · Mar 21, 2009

Heres some pics of my new baby that i bought for $1200 just how u see it.

Before

DAY ONE!!!

WAT DO YOU ALL THINK????

Chythar · Mar 21, 2009

Not a bad start. I take it you're going to buy a new front clip to replace the mangled one?

89 ST4NG · Mar 21, 2009

YUP well i got it already lol ... its in the garage i got 2 fenders and innerfenders, fiberglass hood, bumpercover,bumper, header panel, vert top wwith frame, and airbags and module for $1000

YAY for JUNKYARDS haha

95_5.0@15 · Mar 21, 2009

I think when He said frame he was talking about the unibody part not the body parts

89 ST4NG · Mar 21, 2009

actually clip, but i dont need all of it im going to pull it because the damage isnt past the strut on the passenger side and a little kink on the driver side ... so thats y i didnt get the whole clip and it saves alot of useless work and MONEY

Adam95GT · Mar 22, 2009

WOW have fun with that LOL

Damn... you paid $1200 for that + $1000 parts you could of gotten a v6 and swapped it for that price or a running gt with some dings

Venom351R · Mar 22, 2009

Now thats a project, keep us updated.

99FiveOh · Mar 22, 2009

Yes, make sure you post up all the details! Good luck!

RycheGT · Mar 22, 2009

I think you have your work cut out for you. Thats a hard lick, and if not done right it will never be right. Youll know soon enough.. itl destroy the front tires if its still tweaked.

BlownFiveLiter · Mar 22, 2009

Glad to see you're saving it.

That thing needs to go on a frame rack though. I'd bet my front seat in Hell that it's more tweaked than meets the eye.

89 ST4NG · Mar 22, 2009

Got the carpet cleaned today that saves a few hundred ... but nah damage is very minimal my uncle has been fixing wrecks for a living for about 25 years and he looked at it before i bought it and its all good. i only have to put about $500 more into it but we gotta get it pulled first. Kinda got a monte carlo in the garage with the pulling equipment right now. but once its moved it'll be my turn LOL.

Cant do much right now except to get some leather conditioner and soften the interior back up.

99FiveOh · Mar 22, 2009

Man! Those vines on the first engine pic look like they'd light your a** up with those thorns! Do you think you'll be able to fix all that with the motor in the bay? Might need a new K member, or get one for peace of mind?

95Vert383AOD · Mar 22, 2009

Recreational vehicles are for personal enjoyment. Same goes with alot of projects. A v6 will get you from point A-B but what fun is there in buying a project you don't have to wrench. Thats like buying a model car....opening the box and realizing its already assembled. Of course its nice that you didn't have to do any work. But what fun is there in that.

Now think of all the experience he will have gained from pulling this stuff apart. I have always said "Theres the guy who knows how to change a part, and theres the guy that knows why its there and how it works."

You cant get the experience you're about to get in a book.....even an illustrated one!!!

Enjoy

Chris

Chythar · Mar 23, 2009

89 ST4NG said:
actually clip, but i dont need all of it im going to pull it because the damage isnt past the strut on the passenger side and a little kink on the driver side ... so thats y i didnt get the whole clip and it saves alot of useless work and MONEY

It's a good thing that Stang had a strut tower brace, or you'd have a lot more damage. Any damage to the engine itself? The donor for my Cobra project (see my sig) had a hit similar to yours, and I lost not only the smog pump and its bracket but the water pump & timing cover too.

99FiveOh · Mar 23, 2009

Sucks man, those timing covers and that alt/smog bracket aren't the most common items around!

89 ST4NG · Mar 23, 2009

Chythar said:
It's a good thing that Stang had a strut tower brace, or you'd have a lot more damage. Any damage to the engine itself? The donor for my Cobra project (see my sig) had a hit similar to yours, and I lost not only the smog pump and its bracket but the water pump & timing cover too.

Actuall only one thing was found as of now that im not sure wat it is

there was supose to be a gray housing around the terminals but it was completely gone so i took the black female connector off the box and connected them together temoraraly (it was attached to a bracket which also had the radiator overflow bucket on it too ) ... does anyone know what this is???

BTW Cobra Clone lookin good!!!

BlownFiveLiter · Mar 23, 2009

That's the CCRM. You're gonna need a wiring diagram for that!

89 ST4NG · Mar 23, 2009

StangGT1995 said:
That's the CCRM. You're gonna need a wiring diagram for that!

well i got it back together just without connectors ... but what does it do!

BlownFiveLiter · Mar 23, 2009

It controls the fuel pump, electric fan, air conditioning, um... some transmission stuff on automatic cars. I think that's it.

99FiveOh · Mar 23, 2009

Yes, you'll definately need to get that connected correctly in order to drive the car, it won't even start unless that's right. Funny how all front end collisions in these cars mangles the heck out of that CCRM plug! I have one such harness sitting in my closet with the same exact damage!

95 GT VERT Project!!!!!

89 ST4NG

Chythar

Recently finished repairing my rear

89 ST4NG

95_5.0@15

New Member

89 ST4NG

Adam95GT

New Member

Venom351R

99FiveOh

RycheGT

Member

BlownFiveLiter

have car, will race....wait, it doesn't run

89 ST4NG

99FiveOh

95Vert383AOD

Chythar

Recently finished repairing my rear

99FiveOh

89 ST4NG

BlownFiveLiter

have car, will race....wait, it doesn't run

89 ST4NG

BlownFiveLiter

have car, will race....wait, it doesn't run

99FiveOh

Similar threads

95 GT VERT Project!!!!!

Recently finished repairing my rear

New Member

New Member

Member

have car, will race....wait, it doesn't run

Recently finished repairing my rear

have car, will race....wait, it doesn't run

have car, will race....wait, it doesn't run

Similar threads

Privacy & Transparency

Privacy & Transparency