• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

95 Mustang GT Gears?

  • Thread starter Thread starter Adam706
  • Start date Start date Apr 1, 2007
  • 1
  • 2
Next
1 of 2 Next Last

Adam706

New Member
Apr 1, 2007
25
0
0
Columbus, GA
Apr 1, 2007
#1
  • Apr 1, 2007
  • #1
I do a lot of highway driving (back and forth to work) but the stock 2.78 gears suck!
I've heard 4.10's are good in a AODE... yes, it's an auto.. but others say 4.10's would suck on the highway...
So maybe 3.73's? What do yall pros say?

thanks, Adam


1995 Mustang GT AODE
Underdrive Pulleys
Smog Pump Delete
Shift Kit
Cam
Exhaust
Pro Damper
245/45R16 on stock pony rims dropped 2 1/2in.

next is
fuel injectors
new rails
regulator
new pump
 
S

sage2k

Member
May 23, 2005
645
0
16
Baton Rouge, LA
Apr 1, 2007
#2
  • Apr 1, 2007
  • #2
stock motor + aode + boltons = 4.10s
 

Stanger007

Founding Member
Sep 26, 2001
2,015
2
46
Baton Rouge, LA
Apr 1, 2007
#3
  • Apr 1, 2007
  • #3
I have 4.10s and drive a lot of highway. I don't mind it - look online for a calculator and see the (small) difference in RPM between 4.10 and 3.73... you decide.

If you are bored you can search the forum and find MILES of discussion over the two.

I went with 4.10.

Wes
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 1, 2007
#4
  • Apr 1, 2007
  • #4
Adam, welcome to the boards!

To play counterpoint, I like 3.55's for highway driving. I dont like to tach much over 2K while cruising though.

Slowgt.com has some nice calculators if you want to play with the figures like Wes wisely suggested. And as Wes said, the variances between ratios are not as huge as some would have you believe.

Good luck.
 

Bosko5.0

Active Member
May 18, 2006
1,067
0
37
longwood, FL
Apr 2, 2007
#5
  • Apr 2, 2007
  • #5
I run with 3.55 and 2500 at 70, but 3.73 are like 100 rpm more so I will be upgrading to 3.73 next time.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Apr 2, 2007
#6
  • Apr 2, 2007
  • #6
3.73 ftw
 
R

red95gtconvert

New Member
May 29, 2006
382
0
0
Ponca city, OK
Apr 2, 2007
#7
  • Apr 2, 2007
  • #7
I love my 3.73's, coming from 2.73's they made a big difference.
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Apr 2, 2007
#8
  • Apr 2, 2007
  • #8
I have the t5 withe 3.73... I wish I had 3.90s or 4.10s....
 

xkuntrycowboyx

Member
Mar 31, 2005
281
0
17
Marion, Indiana
Apr 2, 2007
#9
  • Apr 2, 2007
  • #9
3.55's ... i agree with Hissin, and i also have 3.55's and drive alot of highway, i'm a fan of mine. fwiw.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Apr 2, 2007
#10
  • Apr 2, 2007
  • #10
OK...This is the RIGHT ANSWER:
3.73's.

I have an AODE...yeah the 4.10's are nice. At the time I got them I did a lot of hwy driving and I did NOT regret them. To this day I still claim my biggest, bestest mod, esp SOTP feel besides the Vortech was the 3.73.s I drove out of the stang shop that day with the biggest smile on my face. I had NO IDEA our cars could get off the line as quick mine did with the gears. I think there is more to regret getting 4.10s then there is getting 3.73.s ESPECIALLY with today's gas prices!!

RC
 

Stanger007

Founding Member
Sep 26, 2001
2,015
2
46
Baton Rouge, LA
Apr 2, 2007
#11
  • Apr 2, 2007
  • #11
Screw 4.10s... waaay too mild... 6.14s FTW...

http://store.summitracing.com/partd...918962+4294901314+4294776314+115&autoview=sku
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Apr 2, 2007
#12
  • Apr 2, 2007
  • #12
4.10's will be fine on the highway. Your heavy aode car needs the gear!

I have 4.30's and have ZERO problems on the highway and I don't tach too high either

I swapped from my 373's to 430's and gas mileage was not effected what so ever
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 2, 2007
#13
  • Apr 2, 2007
  • #13
Mike, I don't know your rear- tire height. How do you tach at say 75 MPH?
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Apr 2, 2007
#14
  • Apr 2, 2007
  • #14
Its around 2700 at that speed. Rear tire height is 25.5". .1 shorter than stock
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 2, 2007
#15
  • Apr 2, 2007
  • #15
Grn92LX said:
Its around 2700 at that speed. Rear tire height is 25.5". .1 shorter than stock
Click to expand...

It seems like this must be a custom AOD overdrive gear (I recall you talkin about swapping to an Auto some time back, I think) or you still have a 5 spd.
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Apr 2, 2007
#16
  • Apr 2, 2007
  • #16
If you do some highway you'll def. not like the 4.10 on gas.... I have 3.73s and do say 40% of highway and damn it eats gas like no tomorrow...
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Apr 2, 2007
#17
  • Apr 2, 2007
  • #17
HISSIN50 said:
It seems like this must be a custom AOD overdrive gear (I recall you talkin about swapping to an Auto some time back, I think) or you still have a 5 spd.
Click to expand...

Sold the lentech aod before putting it in. Its still a 5sp, I had a t5z in and i'm in the middle of putting my 3550 back in. The 4.30's aren't as bad as people who don't have them think. My usual highway rpm's range from 2300-2700 depending how fast i'm going. My 4cyl daily driver rev's higher

When I put a 26" et street on it, i'll probably wish I went 4.56
 

Adam706

New Member
Apr 1, 2007
25
0
0
Columbus, GA
Apr 2, 2007
#18
  • Apr 2, 2007
  • #18
3.55
3.73
4.10

ok doing 75-80mph i'm around 2000 rpm
where would those gears put me...

thanks for the help
 

xr8d302

I bought a 27" monitor to compensate for my lack o
Apr 29, 2004
1,113
0
36
Medicine Hat, AB
Apr 2, 2007
#19
  • Apr 2, 2007
  • #19
hrmm, don't know about AODE's but honestly, I've done more highway driving in my time than most people I know (from coast to coast across Canada a few times and in every other direction as well...)

I would move towards 3.73's...they'll give you all the kick you require with your auto, and they won't drive your gas bill down that much that you'll kick yourself...

as much as I love my 4.10's when I'm light to light....I utterly despise them on the highway....so do my ears
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Apr 3, 2007
#20
  • Apr 3, 2007
  • #20
Adam706 said:
3.55
3.73
4.10

ok doing 75-80mph i'm around 2000 rpm
where would those gears put me...

thanks for the help
Click to expand...

I went from 2000 to about 2500 RPM at 70MPH going to 373's
RC
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
521
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
174
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:05 PM
AeroCoupe
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
839
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
B
Advice after break down.
  • bjornsn95
  • Jan 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2025
bjornsn95
B
W
Help with 95 GT
  • waynewl34
  • Apr 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
296
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?