- May 15, 2004
- 109
- 0
- 0
For all of you 96-98 Guys out there that want to kick yourself for the extreamly restrictive heads equipped with non SVT 96-98 4.6's..there is a great section on 96-98 Head Secrets in the June 2004 (Display till May 18, 2004) 5.0 Mustang & Super Fords magazine.
Now, this article covers heads and secerts for 96-98 heavily. Discovering the flaws inside and out. It turns out that the non-PI heads arn't as bad as some think. The Guys from Livernois and 5.0 Mustang Teamed up and did this 5 page article and it is def. worth reading if you need some help, and it might prevent you from spending the money pit of a bullit intake or buying brand new PI heads.
Bottom line is see if you can find it and read this, what im really wondering is has anybody tried this? What's the Cost? Is it worth the time that it would take? They're saying it's hella cheap for those who are into mildly modding cars...OPINIONS PLEASE! ?? Don't bash me to hard i just know how much HP potential is in the heads of the Modular 4.6's..I mean i figure if keeping your non PI heads and getting them shave, machined, etc. and whatever they are talking about..hey it might just be worth a try, if you have the money.
Swapping a non-PI intake valve with a PI is likely good for around 15 hp? Hmm..almost sounds to easy..hmm can you say cha ching?
www.livernois.com
For more information: Email me at [email protected]
Aim SN: Speeddemon060[/B]
Maybe you can get online and find the magazine article.
Now, this article covers heads and secerts for 96-98 heavily. Discovering the flaws inside and out. It turns out that the non-PI heads arn't as bad as some think. The Guys from Livernois and 5.0 Mustang Teamed up and did this 5 page article and it is def. worth reading if you need some help, and it might prevent you from spending the money pit of a bullit intake or buying brand new PI heads.
Bottom line is see if you can find it and read this, what im really wondering is has anybody tried this? What's the Cost? Is it worth the time that it would take? They're saying it's hella cheap for those who are into mildly modding cars...OPINIONS PLEASE! ?? Don't bash me to hard i just know how much HP potential is in the heads of the Modular 4.6's..I mean i figure if keeping your non PI heads and getting them shave, machined, etc. and whatever they are talking about..hey it might just be worth a try, if you have the money.
Swapping a non-PI intake valve with a PI is likely good for around 15 hp? Hmm..almost sounds to easy..hmm can you say cha ching?
www.livernois.com
For more information: Email me at [email protected]
Aim SN: Speeddemon060[/B]
Maybe you can get online and find the magazine article.