96 GT SOHC 4.6 to Mark VIII 4.6 DOHC swap

Alright, I don't know if this is the right forum or not, but here goes. Right now I have a 94' Mark VIII, and it runs great, but the car itself inside and out is beat to ****. My plan is to get a 96-98 stang and put it in there. Now, since I have the Mark VIII, I have the computer, harness, transmission, engine, etc. In my research, I have found a couple of questions unanswered, and was hoping for some help:

- Assuming I have a 96-98 automatic stang, and a Mark VIII, will I basically have everything I need to do the swap?
- Will everything from the Mark VIII bolt into the mustang?
- After everythings installed, will it absolutely require a tune?

Any educated answers would be appreciated, and if this is the wrong forum mods could you please move this? Thanks!

Thanks! I'm looking at getting the intake/tb setup from a cobra, can't seem to find any yet but it's not really time for that yet. I looked all around on that site and I can't seem to find anyboody that's actually done the swap, but they had some other great swap info. Any more links or threads would be greatly appreciated!

What I want to do is keep the automatic from the Mark VIII and throw the whole engine/trans combo into the stang, is that possible? Also, what about the exaust, I'm assuming everything won't bolt into place there. I'm going with an aftermarket exhaust eventually, but if it's too much work to make a stock exhaust from the stang or the mark to work, I might as well just get one from the start.

I actually found a guy through the SN95 forums who has done the swap before, and he said the best mustang to get is a 96-97 and he'll tell me what I need once I get a mustang. Thanks for all your help Mustang5L5! I just hope the driveshaft fits.