• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

96 to 99 engine swap questions

  • Thread starter Thread starter smenzel444
  • Start date Start date Jun 20, 2006
S

smenzel444

New Member
Jun 10, 2006
4
0
0
Jun 20, 2006
#1
  • Jun 20, 2006
  • #1
I'm planning on puttin a 99 4.6 SOHC in my 96 GT. I notice a couple problems already. I have the complete engine with harness and TB. Any advice would be appreciated.

1. The 99 has the coil on plug setup, can I use this with my cars wiring?

2. The fuel rail doesn't have a return, it has an electronic regulator or something on the left bank. What do I do with my original return line?

I was thinking of just using my 96 fuel rails, but then what will happen with the electronic regulator plug?

I could also use my 96 coils and harness, but I see some other differences in the wiring on the 99.

I think I'll quit now and let some of you experts tell me what's up.

Thanks a ton.
 

squares98

Member
Aug 20, 2004
852
0
17
Orange,ca
Jun 20, 2006
#2
  • Jun 20, 2006
  • #2
search
but yes you reuse your coil packs, and fuel rails
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jun 20, 2006
#3
  • Jun 20, 2006
  • #3
Transfer all the stuff from your '96 engine over to the '99 long block. Don't bother trying to incorporate the COP set up or return less fuel system to your current set up. There's no advantage to it.
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Jun 20, 2006
#4
  • Jun 20, 2006
  • #4
You'll also need to tap the aluminum cross-over on the intake for the second temp sensor. If you don't have the aluminum cross-over, or you don't want to remove it to get it tapped, look on the side of the block for a plug that you can remove and screw the sensor in. Some people [I can't seem to think of who it was ] use a T fitting in the one provided sensor hole and then screw the two sensors into it.
 
You must log in or register to reply here.

Similar threads

Resolved Holley terminator integration into CCRM
  • BrandonMP
  • Feb 25, 2026
  • SN95 4.6L Mustang Tech
Replies
8
Views
613
SN95 4.6L Mustang Tech Aug 23, 2026
fasterthangas
F
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
194
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
B
Resolved Crank no start after engine swap
  • biggrim
  • Sep 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
100
1996 - 2004 SN95 Mustang -General/Talk- Sep 12, 2026
biggrim
B
J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
270
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Friday at 3:09 PM
2000xp8
C
99 mustang gt no signal to fire coils
  • Cerana04
  • Oct 4, 2025
  • SN95 4.6L Mustang Tech
Replies
0
Views
184
SN95 4.6L Mustang Tech Oct 4, 2025
Cerana04
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?