99 motor update

[cubicgator]

popped motor out of car tonight, tore pan off all rods,crank and piston skirts are cherry, took valve covers off all rockers cams ok, took intake off found valve guide inside intake port on cyl 6 broken off , has been bouncing up and down on valve stem and small shoulder broke off and is stuck in intake valve. noise apears to be coming from contact of piston to valve. i am going in early in morning and pulling head off, i pray piston is ok, but not holding my breath. atleast the motor apears to be repairable and not a total loss. i will update tomorow. later wally.

 

[The Factor]

Thats good news, Good luck

 

[BeenStroked]

Hey sorry about the bad luck Walter !
Sounds like your tune is bad. Who does your tuning for you? I've installed a few intake manifolds in my time, maybe I could tune on it because I have experience? Call me and we could work something out - 1-800-GET BENT!
J/K, sound familiar?

 

[lamrith]

1 - 1-800-GET BENT!
J/K, sound familiar?

You mean bent like is Conn rod and valve are??

 

[BeenStroked]

You mean bent like is Conn rod and valve are??

How about NO!

 

[Tylerb59]

Hope that piston comes out ok.

Keep us updated!

 

[fast99cobra]

we can rebuild it, better stronger faster..........