A few questions about a intake and TB

josh072692

New Member

Mar 24, 2008

16

0

0

Greenville, SC

May 13, 2008

#1

• May 13, 2008

• #1

Hi I have a few questions about a intake setup that I might get. The intake is a Edelbrock Performer EFI upper and lower. The TB is a BBK 75mm and C&L 73mm mass air. The intake also comes with 24lb ford racing injectors and a fuel regulator. I can get all of this for $500 but I think the throttle body might be to big. The current mods my car has are BBK headers, BBK H pipe no cats, BBK CAI, Borla exhaust, but the car also has a crate motor from ford with the E cam and I think GT-40 heads. Its rated at 285 hp. Is this a pretty good combination? Thanks josh

 

5

5.0ina66

Member

Jun 6, 2003

664

0

16

Ohio

May 13, 2008

#2

• May 13, 2008

• #2

josh072692 said:

Hi I have a few questions about a intake setup that I might get. The intake is a Edelbrock Performer EFI upper and lower. The TB is a BBK 75mm and C&L 73mm mass air. The intake also comes with 24lb ford racing injectors and a fuel regulator. I can get all of this for $500 but I think the throttle body might be to big. The current mods my car has are BBK headers, BBK H pipe no cats, BBK CAI, Borla exhaust, but the car also has a crate motor from ford with the E cam and I think GT-40 heads. Its rated at 285 hp. Is this a pretty good combination? Thanks josh

Click to expand...

Sounds like a good setup to me, especially if it has GT40 heads. The TB shouldn't be 'too big' because it's just an air valve, the engine will only suck in as much air as it needs. 'Too big' injectors would be a somewhat different story though.

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

May 13, 2008

#3

• May 13, 2008

• #3

Nothing you've listed is too big at all. JUst make sure the inlet is port matched to 75mm so theres no restriction.

 

josh072692

New Member

Mar 24, 2008

16

0

0

Greenville, SC

May 13, 2008

#4

• May 13, 2008

• #4

Do you think that the injectors would really help that much? Also would that be ok even if it dosent have GT40 heads because I'm not 100% sure? Thanks

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

May 13, 2008

#5

• May 13, 2008

• #5

You could sell them along with the meter. You dont need them now. Or just buy the intake and tb if you havent bought anything yet.

 

josh072692

New Member

Mar 24, 2008

16

0

0

Greenville, SC

May 14, 2008

#6

• May 14, 2008

• #6

How much could I sell the injectors and meter for because he wants to sell it all as a pacakage deal, and what does it take to get a nothcback into the 12's? Thanks sorry about all the questions

 

H

heavy5.0

New Member

May 10, 2008

6

0

0

May 15, 2008

#7

• May 15, 2008

• #7

is the maf calibrated for the injectors? if it is, i dont see why it wouldnt help with the cam and head combo u have.