A9P or A9L : That is the Question....

2dr_sedan

New Member
May 25, 2005
34
0
0
I have a 87 AOD GT with speed density... :nonono:
This week I plan on installing the Interactive Technologies mass air conversion harness. I have both, an A9L and A9P computers, my question is, which one should I use?
Thanks, Mike
 
  • Sponsors (?)


no, A9P (auto puter) can work in a 5 spd or auto. the A9P is preferable because it has marginally better curves (which is why some 5 spd guys run it).

good luck.
 
HISSIN50 said:
no, A9P (auto puter) can work in a 5 spd or auto. the A9P is preferable because it has marginally better curves (which is why some 5 spd guys run it).

good luck.

and the A9S is what came in the FordRacing "Mass Air Conversion" that I got.. The computer is what came in 89-93 5.0L California Cars
Its for 5-speeds....
 
I've always thought A9L was the better of the two as well... Should I just try both and see which one makes the car perform the best?
Mike

stang001d.JPG



Aarrrrgh, decisions, decisions.... :nonono:
 
put a

2dr_sedan said:
I've always thought A9L was the better of the two as well... Should I just try both and see which one makes the car perform the best?
Mike

stang001d.JPG



Aarrrrgh, decisions, decisions.... :nonono:

Well u should put a TwEECer on one of them and make it work better than any other ECC-IV

www.tweecer.com :nice:

I just got one for my car,, lots stuff you can tweek!!! :banana:
 
If one looks at the timing tables of the A9P, it is more favorable than the A9L, as I recall (though not as good as the A9M).
 
I would run the A9P. Thats what I did when I did my T-5 swap as well. I had both to try and the A9P seemed a little better so thats what I kept in it.

I still have the A9L if anyone needs one. PM me.
 
BaXTeR3221 said:
I have the A9p in my car and i have a twEECer. Personally, i would just run the A9l rather than have to change the auto settings. It does some interesting things with the idle when coming to a stop out of gear.


How do you like your TwEECer ? I just got mine I've been messing around and reading alot... :nice: