• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

? about Bullitt Intake Manifold Swap

  • Thread starter Thread starter Maza4ever14
  • Start date Start date Apr 28, 2005
  • 1
  • 2
Next
1 of 2 Next Last

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
Apr 28, 2005
#1
  • Apr 28, 2005
  • #1
i was reading one of my mustang mags and they had a piece on intake manifold for the 2v 4.6L, and the one that caught my attention was the Bullitt I/M. The question i had was what other parts would i need to swap in order to get it to work? It said i would need a new alternator, throttle body, throttle cabel but outta curiosity what else would i need?

thanks in advance
 

Roush97

Founding Member
Jun 9, 2002
1,006
0
36
Greencastle,Pa
Apr 28, 2005
#2
  • Apr 28, 2005
  • #2
you can buy a bullit installation kit that will give you everything you need to make the swap. it consists of THROTTLE BODY, T/B CABLE, T/B GASKET, AIR INLET TUBE, CRUISE CONTROL CABLE, ALTERNATOR, FUEL RAILS, SPACER GASKET, EGR TUBE, THERMOSTAT HOUSING, UPPER RADIATOR HOSE, CRANKCASE VENT TUBE, IAC VALVE INLET TUBE, INTAKE GASKETS, UNDER INTAKE HOSE, JUMPER FOR REAR CROSS OVER
 

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
Apr 28, 2005
#3
  • Apr 28, 2005
  • #3
thank you very much. and did u get that off of a site that has the kit for sale?
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
Apr 28, 2005
#4
  • Apr 28, 2005
  • #4
what year is your car? if you are 2002-2004 then the swap is not legal because it is an older emissions device that was not available on a vehicle sold after 2001. if it is 99-01, then it is a legal swap. if you have a 96-98 stang you must convert to a 2001 spec fuel system. ive asked a smog referee on this topic and thats what he told me. this, of course, is if you want your car to be smog legal.

EDIT: by 2001 spec fuel system i mean unmodified OEM returnless with only CARB EO'd parts approved for 2001 4.6L SOHC mustangs. also if your car is 96-98 the bullitt swap is considered an engine change and can only be certified by a referee.
 

Roush97

Founding Member
Jun 9, 2002
1,006
0
36
Greencastle,Pa
Apr 28, 2005
#5
  • Apr 28, 2005
  • #5
Maza4ever14 said:
thank you very much. and did u get that off of a site that has the kit for sale?
Click to expand...

no problem man. i got the parts list of the kit from Gene Evans Ford. www.gefracing.com.
 

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
Apr 28, 2005
#6
  • Apr 28, 2005
  • #6
its an 04, damn i was really looking forward to maybe doing the swap cuz my uncle is a ford mechanic and gets parts for discount. first ill see how much everything will come out to but i dout ill get the kit. thanks tho
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Apr 28, 2005
#7
  • Apr 28, 2005
  • #7
wait, i dont get it. why is it ok for the 99-01 gt to have and not 02- 04. i mean i read what you said, but i dont understand how that can be. i thought they were the same car for the most part?

as a matter of fact i thought the bullitt was more like the 02 -04 gt's? in 01 the bullitt was the first car to get the 3650 tranny and so did the cars after that. so i thought that that was pretty much the only difference between say beginning 01 gt's and 02 gt's? except for the windsor vs. romeo thing?
 
C

cougar694u

New Member
Apr 12, 2004
145
0
0
San Antonio, TX
Apr 28, 2005
#8
  • Apr 28, 2005
  • #8
ADRENLN said:
wait, i dont get it. why is it ok for the 99-01 gt to have and not 02- 04. i mean i read what you said, but i dont understand how that can be. i thought they were the same car for the most part?

as a matter of fact i thought the bullitt was more like the 02 -04 gt's? in 01 the bullitt was the first car to get the 3650 tranny and so did the cars after that. so i thought that that was pretty much the only difference between say beginning 01 gt's and 02 gt's? except for the windsor vs. romeo thing?
Click to expand...
bdcardinal said:
what year is your car? if you are 2002-2004 then the swap is not legal because it is an older emissions device that was not available on a vehicle sold after 2001. if it is 99-01, then it is a legal swap. if you have a 96-98 stang you must convert to a 2001 spec fuel system. ive asked a smog referee on this topic and thats what he told me. this, of course, is if you want your car to be smog legal.
Click to expand...
It's an emissions thing. It'll physically work, but as far as it being legal for emissions where they're strict, it won't be 'legal'.
 
M

mto gt2000

New Member
Apr 8, 2005
69
0
0
Apr 28, 2005
#9
  • Apr 28, 2005
  • #9
I would like to do that swap, but its to much money.
 

CaliLifeStyle

New Member
Jun 9, 2004
625
0
0
Oxnard, CA
Apr 28, 2005
#10
  • Apr 28, 2005
  • #10
cougar694u said:
It's an emissions thing. It'll physically work, but as far as it being legal for emissions where they're strict, it won't be 'legal'.
Click to expand...

Yeah. You can't put older parts on a newer car. For example, I can't put an '03 Cobra,'01 Cobra,5.0L,351W engine in my Mustang. But, I can put an '04 Cobra,Mach1,'05 GT engine in since it matches the year or is newer. The Bullitt/Special Edition intake is considered a 2001 part.
 

CobraM23

Founding Member
Oct 16, 2002
266
1
16
Johnson City, TN
Apr 28, 2005
#11
  • Apr 28, 2005
  • #11
bdcardinal said:
what year is your car? if you are 2002-2004 then the swap is not legal because it is an older emissions device that was not available on a vehicle sold after 2001. if it is 99-01, then it is a legal swap. if you have a 96-98 stang you must convert to a 2001 spec fuel system. ive asked a smog referee on this topic and thats what he told me. this, of course, is if you want your car to be smog legal.

EDIT: by 2001 spec fuel system i mean unmodified OEM returnless with only CARB EO'd parts approved for 2001 4.6L SOHC mustangs. also if your car is 96-98 the bullitt swap is considered an engine change and can only be certified by a referee.
Click to expand...

Why do you have to use a returnless fuel system with the 96-98's? This was gonna be my next mod but if I gotta switch to a returnless setup, it isnt worth it.
 

hognutz

New Member
Nov 12, 2002
1,940
0
0
albany, oregon
Apr 28, 2005
#12
  • Apr 28, 2005
  • #12
the only way the swap makes sense is if you can find the parts used. When I price all new parts it was almost $1500 I think.

the price of the bullit intake intstall kit for all new parts is more than the p-51 intake.

the p-51 outpreforms the bullitt from stock to modified.

As for emission problems I am not sure if the p-51 would have the same issues or not. I don't quite understand the whole emissions problem with the bullitt though. What equipment is different?
 

mike2858

Founding Member
Jul 10, 2002
1,456
0
36
West Long Branch Jersey.
Apr 28, 2005
#13
  • Apr 28, 2005
  • #13
so many things done to car are illegal. i know that techincally in maine it is illegal to mod any part of the car from factory ie- getting bigger rims= illegal.

i looked and saw u are from cali so maybe it is differnt because your laws are on steroids, so maybe it is better that you dont swap it- i am not sure.
 

topgunz_1

Member
Oct 6, 2004
100
0
16
Louisiana
Apr 28, 2005
#14
  • Apr 28, 2005
  • #14
I dont think swapping an intake manifold is going to bring the EPA helicopters in...
 

ChopSuey

New Member
Jul 30, 2004
21
0
1
Memphis TN
Apr 28, 2005
#15
  • Apr 28, 2005
  • #15
I was just looking through Summit and it shows the Bullut Intake. It says, "The manifold will work on 1999-2004 Mustangs and is considered a direct replacement part, so it's 50-state-legal." I don't live in Cali so I don't care but it should be a legal swap. In Tennesee they don't much care about modifications or emissions. I like how it looks, but it is a lil pricey.
 

White Stang

Member
Feb 11, 2004
467
0
16
Ft Lauderdale
Apr 28, 2005
#16
  • Apr 28, 2005
  • #16
mike2858 said:
so many things done to car are illegal. i know that techincally in maine it is illegal to mod any part of the car from factory ie- getting bigger rims= illegal.

i looked and saw u are from cali so maybe it is differnt because your laws are on steroids, so maybe it is better that you dont swap it- i am not sure.
Click to expand...
 

mike2858

Founding Member
Jul 10, 2002
1,456
0
36
West Long Branch Jersey.
Apr 28, 2005
#17
  • Apr 28, 2005
  • #17
ChopSuey said:
I was just looking through Summit and it shows the Bullut Intake. It says, "The manifold will work on 1999-2004 Mustangs and is considered a direct replacement part, so it's 50-state-legal." I don't live in Cali so I don't care but it should be a legal swap. In Tennesee they don't much care about modifications or emissions. I like how it looks, but it is a lil pricey.
Click to expand...

the original poster is from cali

if your from ten, dont even think twice and do it if you want to.
 

ChopSuey

New Member
Jul 30, 2004
21
0
1
Memphis TN
Apr 28, 2005
#18
  • Apr 28, 2005
  • #18
mike2858 said:
the original poster is from cali

if your from ten, dont even think twice and do it if you want to.
Click to expand...

I understand that the orignal poster is from cali that is why i posted what I did. Re-read my post and you will see that according to Summit because it is considered a factory replacement part that it is 50-state-legal.
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
Apr 28, 2005
#19
  • Apr 28, 2005
  • #19
ya 50 state legal doesnt make it legal for every year. unless they got a CARB EO number for it or if Ford labeled it a OEM replacement manifold than ignore what i said.
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Apr 29, 2005
#20
  • Apr 29, 2005
  • #20
i dont care about a visual cause the people here wouldnt even know what they are looking at, but it would pass a smog test right?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

E
4.6l auto to 5.4l 6 speed
  • EastanF5
  • Jan 22, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
187
SN95 4.6L Mustang Tech Jan 22, 2026
EastanF5
E
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
591
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Weber Carburetor tuning help
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
82
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
79
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
128
SN95 V6 Mustang Tech May 23, 2026
DPP
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?