??? about roller rockers for stock E6 heads

[GTCobra90]

i got these heads with new springs, ported, and valve job and all i want to do is put new roller rockers on them. the different size studs stuff is irritating. im putting them on my 90 HO. what size should i look for?

 

[BlownFiveLiter]

They should be bolt down/pedestal mount. 7/16" IIRC.

 

[RYC CUKR]

Stock bolt size for pedestal mount RRs is 5/16"

 

[GTCobra90]

yeah 5/16

i found out that they were 5/16 but it's a pain to find good roller rockers in that size. i guess im going to have to. does anybody now were good ones are for a good price?

 

[FordGuy88]

There are plenty of good pedistal mount. Check here and also check corral. Just make sure they are pedistal mount and your good to go. But I would go with a 1.6 ratio for the rocker.

 

[RYC CUKR]

I run Scorpion 1.6 pedestal mount RRs on my 93. Very nice RRs, I would recommend them.

 

[jtfairlane]

i found out that they were 5/16 but it's a pain to find good roller rockers in that size. i guess im going to have to. does anybody now were good ones are for a good price?

A pain, seriously? There are like a bajillion aftermarket roller rockers for the stock style 5/16" pedestal mount rockers.

Crane Cams Energizer 44746-16 (same as Ford Racing M-6564-A50), aka the Cobra 1.7 rocker

Crane Cams Gold Race 36759-16 (1.6 ratio)

Ford Racing M-6564-B351 (1.6 ratio)
" " M-6564-BS51 (1.6 ratio)
" " M-6564-E351 (1.7 ratio)
" " M-6564-ES51 (1.7 ratio)

Comp Cams 1052-16 (1.6 ratio)
Comp Cams 1054-16 (1.7 ratio)

Harland Sharp S4007 (1.6 ratio)

Scorpion SCP1021 (1.6 ratio)
Scorpion SCP1022 (1.7 ratio)