Adding extra clutch/friction to limited slip?

[stang9gt]

Anyone add another friction pack/clutch in between the two shims on each side of the limited slip?? Instead of spacer clutch spacer spacer clutch, you would do spacer clutch spacer clutch spacer clutch...It supposed to limit the one wheel spin a little more. Just wondering who has done it and what they think?

 

[codyGT]

All adjustments to preload should be made with the outside shims no by adding rings inside the clutches.

 

[nickthegenius]

Anyone add another friction pack/clutch in between the two shims on each side of the limited slip?? Instead of spacer clutch spacer spacer clutch, you would do spacer clutch spacer clutch spacer clutch...It supposed to limit the one wheel spin a little more. Just wondering who has done it and what they think?

You should register and ask over at Modular Depot. There are quite a few guys that have mentioned it and have had good success. Many of them have used 31-spline Track-Locs out of trucks with extra friction material along with 31-spline axles for a budget rearend setup. It can't be that bad