• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Aftermarket Seats and Height

  • Thread starter Thread starter stangjunkie
  • Start date Start date Jun 21, 2007

stangjunkie

New Member
Nov 15, 2004
381
0
0
Jun 21, 2007
#1
  • Jun 21, 2007
  • #1
ok well i guess this Question is two fold...
Im looking for aftermarket Seats Im pretty sure im going to buy the ones from procarbyscat.com these are the ones they sell at summit... i can get into a pair for $300 and someone on here said that they were good so i like them.
link here to seat

my question was mainly about the height if i put these seats (or any aftermarket seat) on the factory slider that raises the seat... im 6'4 and i often race this car. I still want to fit into this seat with my helmet on. How much hight will these add?

Also how hard is it to fabricate the corbeau seat brackets to fit a seat thats not a corbeau? any other ideas for seat mounting? thanks
 
S

smr

Member
Nov 14, 2005
167
0
16
Nor*Cal (Vacaville)
Jun 22, 2007
#2
  • Jun 22, 2007
  • #2
I have the procar seats by scat and I also purchased scats seat brackets which were suppose to be direct bolt in. i bolted on into the car and with no helmet and seat all the way back against my seat bar almost at 90 degrees my head was smashed against the ceiling. I tried to get ahold of scat regarding it but they never responded. I am going to fab the scat sliders that come with the seats so they bolt directly to the floor and I will use the scat sliders that come with the seats and no brackets ...this is the only thing I can think of. i will be happy to tell you how it goes and how I did it once I tackle it. But for now I am still working on some electrical stuff and getting the engine and trans installed.
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
806
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
R
Lowering Drivers Seat in 2002 Mustang GT
  • Rembrant
  • Jun 1, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
594
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2024
Rembrant
R
Tightening upper control arm bushings at ride height dilemma… need some help
  • AnthonyA1234
  • Dec 27, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
5K
Fox 5.0 Mustang Tech Feb 27, 2025
General karthief
D
4.8 LS swap in a 1975 coupe
  • DFlikks
  • Jul 7, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
8
Views
552
1974 - 1978 Mustang II Talk & Tech Aug 21, 2025
DFlikks
D
Fox Seats and Halo Headrests
  • Wayne Waldrep
  • Jul 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
17
Views
8K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2025
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?