Aftermarket Strut Tower Brace For My 95?

fiveoho · Jan 3, 2006

getting ready to do a motor for my car and im a little concerned about my factory strut tower brace with a aftermarket intake. i know alot of guys just take it off and leave it off but i really had rather replace it. nothing is set in stone yet but i will prob be running a trickflow intake (street heat or track heat). im pretty sure it would clip the factory brace anyway, but with the taller valve covers , a spacer and a different intake im almost positive i will have a problem.

seems like i seen a guy have a BBK st brace? im sure there are several to choose from, just need a little guidance here. prices and links would be helpful too.

thanks

CManT1914 · Jan 3, 2006

BBK seems to be the most popular. You WILL hit the factory with that intake setup. Try 50resto.com, or summitracing.com (not sure on prices).

95cobraguy · Jan 3, 2006

i got my bbk from summit and it clears my edelbrock performer rpm II manifold perfectly (suprisingly).

fiveoho · Jan 3, 2006

CManT1914 said:
BBK seems to be the most popular. You WILL hit the factory with that intake setup. Try 50resto.com, or summitracing.com (not sure on prices).

preciate it man. o by the way, are you pretty happy with that tfs stage 1 cam? ive heard a stage 1 with 1.7 rockers ,which i think tamed the sound down a little. still sounded really good tho. are you runnin' 1.6 rockers? if so, how lopey is it?

fiveoho · Jan 3, 2006

so on a aftermarket stb, does the intake "go thru" the middle of the stb (bigger opening) or is it just angled differently so the brace is just taller?

xr8d302 · Jan 3, 2006

Let's get some pictures of my BBK Gripp Series STB up...

This STB seems to be about the same height as my stocker, but it's on an angle, giving more room for height on the driver side of the engine bay than the passenger side, but still a solid 2 inches on the passenger side to boot. If you're going to increase clearance by 2 inches, then you'd have a problem, but if not, you're good to go

urban96 · Jan 3, 2006

my steeda clears the cobra intake just fine

fiveoho · Jan 3, 2006

thanks guys

keep 'em comin

thanks for pic (nice lookin ride btw)

ES Stangin · Jan 3, 2006

When I bought my car it had the GT40 intake on it and a strut tower bar that cleared it.. I might possibly be selling it if interested..

95GTV8 · Jan 3, 2006

I have a Maximum Motorsports Chrome STB. I got it for $99 shipped off corral.net advertisements. It's a beatiful piece and it clears my cobra intake manifold fine.

fiveoho · Jan 3, 2006

ES Stangin said:
When I bought my car it had the GT40 intake on it and a strut tower bar that cleared it.. I might possibly be selling it if interested..

i need to find out the specs of a gt40 to a trickflow (size wise)....i might be interested....

BlackVert · Jan 3, 2006

i had a trick flow upper/lower on mine before the kenne-bell. i also had a steeda stb. i loved it and wish i could still use it, but it doesn't clear the nose of the kb, so i had to take it off. i'd sell it for $50 plus shipping if you are interested. pm me if interested.

BlackVert · Jan 3, 2006

xr8d302 said:
Let's get some pictures of my BBK Gripp Series STB up...

This STB seems to be about the same height as my stocker, but it's on an angle, giving more room for height on the driver side of the engine bay than the passenger side, but still a solid 2 inches on the passenger side to boot. If you're going to increase clearance by 2 inches, then you'd have a problem, but if not, you're good to go

that one looks like it might clear a k/b, hmmmmmm

urban96 · Jan 3, 2006

BlackVert said:
that one looks like it might clear a k/b, hmmmmmm

ya the steeda goes infront of the intake where it looks like that BBK goes right over

but he also has the stock intake, dont know hoe much tallert he KB is then that

xr8d302 · Jan 4, 2006

I agree urban, but how much further does the stock manifold differ from from a GT40 intake? Anyone have any distinct measurements? I'm not sure exactly how much bigger my BBK strut tower brace is compared to my stock peice, but it doesn't look like much

CManT1914 · Jan 4, 2006

fiveoho said:
preciate it man. o by the way, are you pretty happy with that tfs stage 1 cam? ive heard a stage 1 with 1.7 rockers ,which i think tamed the sound down a little. still sounded really good tho. are you runnin' 1.6 rockers? if so, how lopey is it?

I love this cam! It's pretty lopey. I am running split ratio rockers (1.7 on the intake, 1.6 on the exhaust). The rockers don't make a difference for the lope (lift matters not really). It's the lobe seperation angle that matters (LSA). The lower the LSA, the more lope. I'm gonna try and get my mom's digital camera this weekend and get a sound/video clip now that I have my electrical issues squared away. I'll try and remember to send you a link when I do.

xr8d302 · Jan 4, 2006

Here's some more pics that might show some more clearance, don't mind the dirty engine bay

Methodical · Jan 4, 2006

The original poster mentioned using a spacer. What size spacer do you plan to use (that will affect your decision on brace). I have the same issue. I have the Edelbrock intake with 3/8" spacer, taller valve covers and the Cobra R hood. The stock brace won't fit. I talked to a rep at Maximum Motorsport and he suggested that I may need to get the strut tower brace used for the 351 engine because it is taller. You may want to give them a call. From what I've noticed with my brace clearing the intake isn't the problem - the problem is clearing the TB.

For those that replied - are any of you using an intake spacer and taller valve covers. If yes, then the braces you suggest are probably ok. If no then I don't think those braces will help the poster.

Oh by the way, if you put on an intake spacer, you may need a new hood too?

Peace
Al

Green 94 5.0 · Jan 4, 2006

fiveoho said:
preciate it man. o by the way, are you pretty happy with that tfs stage 1 cam? ive heard a stage 1 with 1.7 rockers ,which i think tamed the sound down a little. still sounded really good tho. are you runnin' 1.6 rockers? if so, how lopey is it?

i love my tfs stage 1 cam. here is a vid of the sound.....

http://roger.tiora.net/stangidle.mpeg

as far as the strut brace goes, i got mine from steeda. it goes around the intake. here is a pic.....

Green 94 5.0 · Jan 4, 2006

fiveoho said:
i need to find out the specs of a gt40 to a trickflow (size wise)....i might be interested....

the gt40 has an extremely large upper. if the stb clears that, it should clear the tfs intake as well.

Aftermarket Strut Tower Brace For My 95?

fiveoho

CManT1914

New Member

95cobraguy

Member

fiveoho

fiveoho

xr8d302

I bought a 27" monitor to compensate for my lack o

Attachments

urban96

bubb rubb says:"woo woooooo"

fiveoho

ES Stangin

New Member

95GTV8

New Member

fiveoho

BlackVert

BlackVert

Attachments

urban96

bubb rubb says:"woo woooooo"

xr8d302

I bought a 27" monitor to compensate for my lack o

CManT1914

New Member

xr8d302

I bought a 27" monitor to compensate for my lack o

Attachments

Methodical

Green 94 5.0

Green 94 5.0

Similar threads

Aftermarket Strut Tower Brace For My 95?

New Member

Member

I bought a 27" monitor to compensate for my lack o

Attachments

bubb rubb says:"woo woooooo"

New Member

New Member

Attachments

bubb rubb says:"woo woooooo"

I bought a 27" monitor to compensate for my lack o

New Member

I bought a 27" monitor to compensate for my lack o

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency