air/oil seperators anyone?

Here's a little help from the airplane world.If you can raise the end closest to the intake tube this will help.I gives the oil a chance to condense onto the walls of the tube and will run back toward the engine.You can add a piece of rubber hose to give you more length on the pvc tube.You can even use some of those copper pot scrubbers and stick some into the hose.This helps the oil to condense by giving it something to condense onto.You want to use enough to collect oil but not enough to restrict the flow of air.Secure it in the hose with a wire brad at each end of the pot scrubber.Thats basically all the store bought separators do anyway.

I'm looking into doing this myself. I can find the water and air seperator but I'm not too sure what size fittings I'll need on each end when I slide the PCV tubings onto them. I believe the fittings are called barbed fittings. What the guy said above is true as well. Some lift will help the oil from even making it through the tube.

you'll probably want a longer hose so you can mount the seperator against the firewall. you'll also need to fab some kind of bracket to hold it. i've got one, just haven't installed it yet.