Alignment Shops

i know what you mean, i took mine to ntb and as i was walking back to pick up my car they let this little mexican pull it off the rack and he left it in first gear bringing it up over 4k rpms across the parking lot...

Unfortunately, the stock mustang caster/camber adjustment isnt exactly one that I would be too excited about screwing with. I adjusted my alignment not too long ago, and thankfully only toe was out of spec. I will be happy with that untill I get some suspension done and MM caster/camber plates. I really dont feel like drilling rivets and whatnot (for stock, according to alignment machine).

Point being...most techs will try to make it look ok, or say its ok so they dont have to mess with it. Alignments usually suck, and unfortunately for someone who cant do their own alignment not a very good situation.

If I was in your shoes, I'd get a set of caster/camber plates installed by a mustang shop (if you can find one) and have them set the alignment.

post up your specs and i'll let you know what needs to be done to fix it.

you can PM me if you like. i'm an ASE alignment tech BTW