ALMOST DONE!! Need help with blower acc. install(urgent)

Heres my plan to have my car running by friday
MONDAY:
1 MSD awaiting confirmation from you all but mostly done
2.Gauges done kinda, sitting in seat next to me
3. Discharge DONE
4.ALTERNATOR DONE
5. TENSIONER DOne
6. Idler pulley for vortech - needs new bolts
Tueday:
1 FUEL PUMP DONE
2. CRANK PULLEY(1 bolt still stuck)
3.rad cover DONE
4 Belts, (ANYONE KNOW SIZE OF BELT for no smog? I tried mine but it seems 1-2 inches to big)<< need to get crank puley off first

Wednesday:
1POWERPIPE
2.MAF
3.K&N

Thursday:
1.Tap oil pan
2 Supercharger oil lines
3. Buy some mobil 1 syntec and do oil change
4. 4 plugs on drivers side(1 heat range colder) DONE

I know i did some things in the wrong order but i really want to have my dad help me on some parts but he wont be home till wed. I dont think im forgeting anything, sure hope so too but anyways heres my problem for tonite:

In the image i drew shows what i think goes where on the msd 6btm. the smaller white and red wire i dont know what to do and another connection on the other side i dont know what to do with either. Can anyone elp me? also where in the coil do the orange and black wires go?


another thing i noticed was my gas pedal is slack and on the floor but everyting is hooked up. is this because my battery has been unhooked for a week? i think i rehooked up the TB right when i took it off to polish it.

VibrantRedGT said:

FYI work on the powerpipe now. That is not a last minute item. Did you buy the MSD adapter harness? After you have that it's just a ground and power source. Then getting the dial in the car. Would also put the plugs in on Tuesday.

Click to expand...

What do you suggest to use to cut the fender? I hae a dremel but i dunno what bit to use, all i do is cut a hole, and mount the 90* bend and the power pipe just sits there right? And what MSD adapter harness are you talking about? There is an adapter on the end of the small red and white wires but thats it.

ok well what harness is that? all i have is the red adapter on the end of the red and white wires. do you know what the other wire is on the other side of the msd 6btm? or why my pedal is slack?

ok, but i want my car done by this friday and that wont be here in time, cant ijust splice it in?

cool thanks for the advise but im going to go ahead and splice it in, any one know how?