Alot of modding goin on, lookin for some advice

Ok, I have a 1995 GT. I have just about finished my upgrade. today i was offered a great deal (so I think) Anderson PMS 2 $250. So i grabbed it..

Before this goes into a , u should have gotten a QH or Tweecer. Well i was not planning on it , I was just gonna pay for a Piggy back tune and Dyno for $300 from a local shop, but thought this would be a better investment.

I almost have it back together from the swap.

I have added

Gt40p heads milled .030", GT40 intake w/1" spacer, E303 cam, FMS headers and O/R H-pipe, Edelbrock elbow, 70 mm tb, 24# injectors , 90mm Pro-m/Granatelli MAF, 3;73 gears and 4r70w trans.

So anyone have any experience with the Anderson PMS 2 ?

I have read a few peeps love them in NMRA or something like that?

Thanks.



just got the user manual emailed to me from AMS. Gonna start reading it tonight.

Anyone else here running one?

So are you happy with the PMS?

It seems to have all the features I wanted and I dont need a laptop to use it...

i have a start up tune ready for it.

timing: +10
start-up fuel:-10%
Low Load (Fuel first & Timing second)
2200rpm:
4000rpm:
6000rpm:
7800rpm:
Medium Load (Fuel first & Timing second)
2200rpm:
4000rpm:
6000rpm:
7800rpm:
High Load (Fuel first & Timing second)
2200rpm: 0/+10
4000rpm: 0/+8
6000rpm: 0/+6
7800rpm: 0/+6
WOT (Fuel first & Timing second)
2200rpm: 0/+10
4000rpm: 0/+8
6000rpm: 0/+6
7800rpm: 0/+6

Anyone got another recommendation?