Wow after two month of working on the thing it fired up and sounded damn good. I had the dizzy 180 out on it some how but once i found that it fired right up. 60lb of oil pressure right off the bat. I was happy that there was no valve train noise at all. It also seems louder. I gotta take it to get aligned on friday.
Also everyone that TwEEC's be read for lots of questions. Tuning my h/c/i was pretty easy but this 347 looks light it might take a little more TLC. It did idle right off the bat pretty good with my base tune i made up, i had 30 on the low slope and 34 on the high slope. But after a minute or so the idle started to deteriorate and it started to get pretty rich like 12ish to 1 on my PLX. Then it would stall if you turned the wheel. I know i still got a lot of tuning in front of me. I gotta do the injector timing, and work on the slopes.
Also everyone that TwEEC's be read for lots of questions. Tuning my h/c/i was pretty easy but this 347 looks light it might take a little more TLC. It did idle right off the bat pretty good with my base tune i made up, i had 30 on the low slope and 34 on the high slope. But after a minute or so the idle started to deteriorate and it started to get pretty rich like 12ish to 1 on my PLX. Then it would stall if you turned the wheel. I know i still got a lot of tuning in front of me. I gotta do the injector timing, and work on the slopes.