• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

alright....To hell with flowmaster 2 chambers!

  • Thread starter Thread starter 5.02GO
  • Start date Start date Dec 25, 2005
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

5.02GO

Founding Member
Jun 26, 2001
308
0
16
Ky, Blue Sky Country
Dec 25, 2005
#1
  • Dec 25, 2005
  • #1
After 10 years of flowmaster 2 chambers and a 200 mile round trip friday night, my ears can no longer tolerate these dronin' muthertruckers. I did consider flowmaster force II cat backs (3 chamber). I did read that some people said that there was still a noticable drone present.

I have been searching thru threads for a couple of hours now and believe that the Borla XS mufflers are for me. From what i have read, they are supposed to be very quiet with little to no drone.

From what i have seen on borlas website, they do not make a catback system for my car (1993 LX). Besides i think they're tips look like crap
anyhow. So i figured that i could purchase the stainless steel tips somewhere else and just weld in the borla xs's.

I cannot find a part number or anything on the just the mufflers for my car. Only information borla gives is measurements. I have no idea what i need.

Does anyone have any numbers that i can use? Does anyone use borla xs's? And where can you buy em'?
I am using the stock H pipe by the way.

Thanks
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 26, 2005
#2
  • Dec 26, 2005
  • #2
Put a couple of Dynomax Super Turbos on it and be done with it. Your ears will thank you.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Dec 26, 2005
#3
  • Dec 26, 2005
  • #3
You could also check out http://www.mustangexhaust.com and register (It's Free!). You can visit the forums and listen to several clips of different exhaust on a Mustang similar to yours. They list year, modifications, and the full exhaust combo on most of them.

Or...you could use this as an excuse to change rear gears; maybe bumping up the rpm's a couple hundred would get you out of drone territory.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Dec 26, 2005
#4
  • Dec 26, 2005
  • #4
Michael Yount said:
Put a couple of Dynomax Super Turbos on it and be done with it. Your ears will thank you.
Click to expand...
I agree with Michael.

I switched from old 2 chamber Flows to Super Turbos and it quieted it up, but still sounds good at RPM.

I also picked up 5 RWHP and 3 ft Lbs to boot.

Not bad for $35 a peice from a local muffler shop.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,037
1,625
194
NJ
Dec 26, 2005
#5
  • Dec 26, 2005
  • #5
You heard right, the 3 chamber can also be very loud, as soon as i got the h/c/i setup on my car it became extremely loud, enough that i'm a bit hesitant to start it late night.
Bassani and magnaflow are also good choices to quiet the car (somewhat), not to loud cruising or at idle, but when you rip into it, you know somethings there.
 

5.02GO

Founding Member
Jun 26, 2001
308
0
16
Ky, Blue Sky Country
Dec 26, 2005
#6
  • Dec 26, 2005
  • #6
I am now gonna consider the dynomax super turbos. Since i cannot find any info on the borlas.

Looks like dynomax has a catback system for my car. Oh, and look it has the ORIGINAL style tips too. HOOYAA!

I did go and download a couple of exhaust samples. The turbos dont sound to bad. The recordings were a bit distorted though.

Anyone tried a dynomax cat back?


Thanks for the help guys!
 

stangnutlx

New Member
May 24, 2005
242
0
0
Coventry, RI
Dec 26, 2005
#7
  • Dec 26, 2005
  • #7
5.02GO said:
I am now gonna consider the dynomax super turbos. Since i cannot find any info on the borlas.

Looks like dynomax has a catback system for my car. Oh, and look it has the ORIGINAL style tips too. HOOYAA!

I did go and download a couple of exhaust samples. The turbos dont sound to bad. The recordings were a bit distorted though.

Anyone tried a dynomax cat back?


Thanks for the help guys!
Click to expand...



Just bought Spintech Sportman Streets for my LX and they sound incredible with longtubes no cats and tailpipes. I did notice the car pulls harder with them than my flow masters dumped.
 

RyanSG

Founding Member
Oct 24, 2002
286
0
17
Allentown, Pa
Dec 26, 2005
#8
  • Dec 26, 2005
  • #8
yeah i ditched my dumped flows to, took all the sound deadaning out and abotu 2 weeks later the flows flowed their way to the dump. Put on a set of summit glasspack and would never go back.. least with the turbo setup they work and sound awsome. Although i'm not sure i would want to put a glass pack on a car without a turbo or somethign to quiet it up a little.
 
D

DuffManRHA

New Member
Dec 23, 2005
15
0
0
San Marcos, CA
Dec 26, 2005
#9
  • Dec 26, 2005
  • #9
I have the flowmaster 3 chambers and I LOVE the way that they sound... nice tone at cruise, pretty loud (but not inside the car really) at WOT - resonates a bit at 2000-2400 or so, but it sounds real nice to me

BTW : Whats up Mike!

Eric
 
I

Iand

New Member
Aug 18, 2004
50
0
0
Kelowna, BC
Dec 26, 2005
#10
  • Dec 26, 2005
  • #10
I have 2 chambers as well, and i hardly knotice a drone. Not many serious mods thou besides a cam. Also, i knoticed a HUGE difference in the drone when i dynamatted my trunk, just an FYI.
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Dec 26, 2005
#11
  • Dec 26, 2005
  • #11
I have super turbos on mine and it sounds like my dads 68 fast back with a 390. Its a nice sound, much beter than the flows.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 26, 2005
#12
  • Dec 26, 2005
  • #12
I've had one, two and three chamber Flowmasters on a variety of cars -- quite frankly -- I could rarely tell them apart. They're simply all way too loud for these old ears. There just isn't a whole lot between OEM and 'too loud'. The Dynomax Super Turbos are about the only thing I've been able to ID that come close to being in the middle.

Be careful of the straight-through perforated designs by companies like Magnaflow or Bassani -- as soon as the packing deteriorates a bit, they get noticeably louder -- at least both of mine did.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Dec 26, 2005
#13
  • Dec 26, 2005
  • #13
Super Turbo mufflers from Dynomax will be really quite. On the highway, at idle but they are very good mufflers.

I had a pair on my 93GT when I was commuting between college and home (60 miles each way) They are great mufflers!
 

retro50

New Member
Jul 15, 2003
191
0
0
Plymouth,MA
Dec 26, 2005
#14
  • Dec 26, 2005
  • #14
I too have dynomax mufflers. Mine are the fully welded design Ultra Flows. They are a straight through design and they are alot quiter then the Flow masters. I don't have a drone either.
 

stangnutlx

New Member
May 24, 2005
242
0
0
Coventry, RI
Dec 26, 2005
#15
  • Dec 26, 2005
  • #15
retro50 said:
I too have dynomax mufflers. Mine are the fully welded design Ultra Flows. They are a straight through design and they are alot quiter then the Flow masters. I don't have a drone either.
Click to expand...


I agree i dont have the drone with my spintechs at all.... i really like them alot.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 26, 2005
#16
  • Dec 26, 2005
  • #16
5.0toGo - you might also consider putting long tubes on it -- I know of a couple of cases of guys that added long tubes and said that it virtually eliminated the drone/resonance.
 

5.02GO

Founding Member
Jun 26, 2001
308
0
16
Ky, Blue Sky Country
Dec 27, 2005
#17
  • Dec 27, 2005
  • #17
Michael Yount said:
5.0toGo - you might also consider putting long tubes on it -- I know of a couple of cases of guys that added long tubes and said that it virtually eliminated the drone/resonance.
Click to expand...


I'd rather not bother with long tubes. If the dynomax super turbos are quiet like you say, then i should be fine. Kinda sounds like you and I have the same "type" of ears.

I always liked the "flowmaster" sound. Over the past year or two i have noticed that the WHUUUUUUU (drone) was hurting my ears. Friday night, enough is enough. I just cant take it anymore. Whether its my ears hurting and/or me getting a little older - i dont care. THOSE damn things have gotta go!

Oh, those dynomax dont drone or have very little drone. Right mike?

Thanks mike!
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 27, 2005
#18
  • Dec 27, 2005
  • #18
That drone is a resonance that can be masked with mufflers, but it probably can't be eliminated. I've not used the dynomax super turbos myself - unfortunately they don't make it in a configuration that will work on my Volvo. But the posts are unanimous - they're the quietest aftermarket around.
 
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Dec 27, 2005
#19
  • Dec 27, 2005
  • #19
Go to Advance Auto Parts and test the sound of all the Dynomax muffs. Its like car speakers, you press the button and you hear the muffler sound. I have the dynos on my 460 setup and they sound great. Cool thing is they were throwing out the mufflers, brand new, because they were returns. They were perfect, and I would have been fired for taking them, but oh well. It chaps my ass that they destroy perfectly good parts and waste good metal. Saved me 70 bucks. They threw out a perfectly good brush guard too. Those things are all steel and cost like $500. Its in my garage now, lol!!!
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Dec 27, 2005
#20
  • Dec 27, 2005
  • #20
5.02GO said:
Oh, those dynomax dont drone or have very little drone. Right mike?

Thanks mike!
Click to expand...


I'm telling you... I spent 1 hour each way to and from college between 1998 - 2002. I drove the 93 every day at 70 to 75MPH for the majority of the trip and there was zero drone in the cockpit. I would like to mention that the 93 was stock (completely) just for clarification. You will be able to hold conversations in the car for sure. They are noticably quiter than Flow's

You ears won't be dissapointed
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
447
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
344
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
3
2006 v6 exhaust conversion
  • 302Rich
  • Jun 10, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
170
2005 - 2014 S-197 Mustang -General/Talk- Jun 10, 2025
302Rich
3
G
Quiet my 2015 GT on the cheap
  • gsrblack
  • Feb 12, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
6
Views
788
2015 - 2023 (S550) Mustang -General/Talk Apr 16, 2025
gkomo
D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
141
SN95 V6 Mustang Tech May 23, 2026
DPP
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?