Alternator Power Wire

9250stangGt

New Member
Jun 24, 2008
3
0
0
Hello, i just recently installed a 130amp 3g alternator. This is one of those self exciting alternators which just has the one power cable that connects straight to the positive battery terminal. The alternator came with about 4 foot power cable, i think it was 8gauge wire. I recently did the battery swap to the trunk and from what i have been able to read, I need to run about 4 guage wire from the alternator to the battery in the trunk. My question is, when i fab up my wire should i put a fuseable link in the wire, and what size fuse should i use? Also should the fuse be closer to the battery, or the alternator ( i think its the battery but i am not sure)
 
I'd fuse near the source (in this case, your alternator). Fuse for the weakest link. In this case, the cable is the weakest link and it really is too small IMHO for a 130 amp application.
IIRC Ford used a 6 AWG cable on 94-95 Stangs with a 130 amp alt.

I would get a 4 AWG cable and ANL fuse.

For your trunk battery, I'd simply keep your charge cable going from the alt to the solenoid. The new fatty battery cable from the solenoid to the trunk will take care of the rest.