• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

ALTERNATOR PULLEY

  • Thread starter Thread starter lxwants12's
  • Start date Start date Mar 21, 2006
  • 1
  • 2
Next
1 of 2 Next Last

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 21, 2006
#1
  • Mar 21, 2006
  • #1
I have an underdrive pulley kit on my car now...and a 3 g alternator...i was wondering if i am supposed to swap the alt pulley for the stock one cause i heard it will help charging a little more...
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Mar 21, 2006
#2
  • Mar 21, 2006
  • #2
Only if your charging system is inadequate at idle.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 21, 2006
#3
  • Mar 21, 2006
  • #3
yea it is.do they sell pulleys at autozone or does it only come on the alt itself
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Mar 21, 2006
#4
  • Mar 21, 2006
  • #4
Hmmm... good question. I've never tried to buy a pulley that way so couldn't tell you for sure. Maybe a trip to the junkyard for a fried alternator might be the way to go.
 
8

8950HO

New Member
Mar 31, 2005
658
2
0
Mar 21, 2006
#5
  • Mar 21, 2006
  • #5
I`ll take a guess here and say that a 3g with a stock 3g size pulley probably won`t charge well at idle with a underdrive crank pulley.

Every 3g alternator I`ve seen comes with a huge 2-1/2" dia pulley.

Try a stock 2g size pulley first and if that`s not enough try a smaller od alternator pulley,if your running a underdrive crank pulley.

A local alternator rebuilder should have a good selection of smaller pulleys.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 22, 2006
#6
  • Mar 22, 2006
  • #6
picked up a burnt alt from the jy today for 5 bucks pulley is way smaller then the one on the pa performance....the 2g pully is under 2 inches!!
 

bock

Founding Member
Jan 7, 2002
648
2
19
Montreal,Qc
Mar 22, 2006
#7
  • Mar 22, 2006
  • #7
i use the march pulleys kit.(3 pulleys)

With all 3 in place,the alt was not charging at idle.
I just put back the stock alt pulley in place...
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Mar 22, 2006
#8
  • Mar 22, 2006
  • #8
I would run a 1 7/8" overdrive alternator pulley with the 4 inch underdrive crank pulley.

Like one from FFI.
http://fordfuelinjection.com/index.php?p=67
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 28, 2006
#9
  • Mar 28, 2006
  • #9
i tried to swap pulleys from a stock 2g alt and the pulley fits but i had to put a small spacer behind it because it touches the alt housing when tightend, and it doesnt give the nut alot of thread..only goes on like 1.5 turns and i dont feel good about that, so i left it alone...my alt is from pa performance...can i use the pulleys from that link SLEEPER on my alt...i dotn wanna buy it and it fits the same way as the one i just described
 
8

8950HO

New Member
Mar 31, 2005
658
2
0
Mar 28, 2006
#10
  • Mar 28, 2006
  • #10
lxwants12's said:
i tried to swap pulleys from a stock 2g alt and the pulley fits but i had to put a small spacer behind it because it touches the alt housing when tightend, and it doesnt give the nut alot of thread..only goes on like 1.5 turns and i dont feel good about that, so i left it alone...my alt is from pa performance...can i use the pulleys from that link SLEEPER on my alt...i dotn wanna buy it and it fits the same way as the one i just described
Click to expand...

94-95 3g`s are different than 96 and up 3g`s.The cases are a little different and the pulley spacing is different.(I`m pretty sure a stock 2g pulley will fit a 94-95 3g without issues).

www.aspracing.com makes a 1-7/8" OD alternator pulley,but it only fits 94-95,3g`s.
They said if I used a washer as a spacer it would push the pulley grooves too far out causing the belt to walk off.They could make a custom 1-7/8" od pulley,but it was pricey.

E-mail Pa-Performance and ask them if they have any smaller pulleys that will fit your alternator properly.

In my case I have a 96 Taurus 130amp,3g alternator and a local rebuilder had a 2g size diameter pulley with the correct spacing that fit my 3g.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 28, 2006
#11
  • Mar 28, 2006
  • #11
yea i called PA..damn i figured myself a smart guy and that never crossed my mind!
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
315
283
134
Apache Junction, AZ
Mar 29, 2006
#12
  • Mar 29, 2006
  • #12
Being that I work in a parts store and get a lot of old alt's coming through all the time as core/defect returns, I was able to swap the pulley that came with my 3g with a smaller one from an old 3g someone had turned in as a core. The big ol' honkin' pulley that came on my 3g wasn't charging enough as it should have at idle, but with the smaller pulley swapped on there, it's perfect. Doesn't dip the slightest bit, even with lights on, wipers going, and vent blowing full-blast. The pulley I swapped on there is a nice, shiny brass piece, too, so I got a bit of gold-lookin' bling-bling going on underhood now, too.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 29, 2006
#13
  • Mar 29, 2006
  • #13
can u measure that pulley for me darkwriter? and what size are ur other pulleys? i called pa and they want me to measure my pulleys b4 they recommend a pulley size
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Mar 29, 2006
#14
  • Mar 29, 2006
  • #14
Do you have underdrive pulleys?
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 29, 2006
#15
  • Mar 29, 2006
  • #15
yea i do.....so what are the ideal sizes of the pulleys for good idle charge?
u said 4 inch crank, 1 7/8 alt...and what about water pump?
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Mar 29, 2006
#16
  • Mar 29, 2006
  • #16
lxwants12's said:
yea i do.....so what are the ideal sizes of the pulleys for good idle charge?
u said 4 inch crank, 1 7/8 alt...and what about water pump?
Click to expand...
Yes 1 7/8" alt pulley, 4 inch crank pulley and stock water pump pulley.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 29, 2006
#17
  • Mar 29, 2006
  • #17
ok thanks...
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 29, 2006
#18
  • Mar 29, 2006
  • #18
what size is the water pump pulley
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Mar 29, 2006
#19
  • Mar 29, 2006
  • #19
lxwants12's said:
what size is the water pump pulley
Click to expand...
Stock is 4 3/4" from lip to lip.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 29, 2006
#20
  • Mar 29, 2006
  • #20
ok thanks again...ill get everything straight b4 this weekend
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
Engine Belt routing with supercharger and smog/ac/ps delete
  • Steve6482
  • Jul 15, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
157
Fox 5.0 Mustang Tech Jul 15, 2026
Steve6482
S
Engine Underdrive pulleys
  • Mindseye007
  • Feb 1, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
1K
Fox 5.0 Mustang Tech Feb 14, 2026
Willybill32
T
Engine Removal of Steeda Underdrive pulley
  • THughes
  • Jun 30, 2026
  • 2005 - 2009 Specific Tech
Replies
1
Views
178
2005 - 2009 Specific Tech Jul 4, 2026
Dino Dino Bambino
3
Electrical Starter solenoid green wire?
  • 387lx
  • Jun 1, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
264
Fox 5.0 Mustang Tech Jun 2, 2026
AeroCoupe
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?