Alternator Question?

aftermarket ones are usually 200A I got mine from a guy off ebay for 129.99+ shipping its a nice looking alt already has a smaller pulley on it. The guy is real nice I have emailed him many times asking him questions about stuff. it has a lifetime warrenty on it (that was a must have). I was havng problems with it emailed him he said send it back sent it back waited a few days emailed him, he said its on its way back a solder connection had come loose. I put it back in the car works great. I have noticed that sitting idle the gauge sits low but once you hit the gas it jumps back up I'm guessing thats from the pulley while your driving its fine. It works for me and my car got all kinda strobes and **** for the fire company.

If you want any info let me know i'll get ya his name

Hey mysterymachine, a smaller alt pulley will spin faster and u should get a better charge, not a worse one.

When I put underdrive pulleys on my car the charge got so low at idle that the car would stall and wouldnt start back up because the battery was dead.I called PA performance for a high output alternator but they told me that the one our cars came with stock already puts out the same as their high output ones.So I had them ship me new heavy duty battery and alt. cables.Which helped a little but not enough.I then tried a new motorcraft alt. Didnt help.Also tried new battery.I then sent the car to Larrocas perf. to have them try and fix it and they said that some cars (especially AODE) just dont run with u/d pulleys.They checked all the wiring and everything checked ok.They recomended putting the stock ones back on which I did and no problems since.And all my cars has is the stock Mach 460.

I've heard a lot of guys having charging issues with pulleys its a hit or miss with them some have problems some don't

Put your stock pullie back on, that should work.