I just installed a complete forged 347 stroker kit with recessed pistons to lower my compression ratio because im adding a paxton s/c I was interested in buying a set of AFR aluminum heads but Im not sure on which set would be best for my set up. the kit I bought says my compression ratio will be 9.0 if I have 64cc combustion chamber.
The head I was looking at was 185cc intake port 2.020 intake valves 1.600 exhaust 61cc combustion chamber
would this be a good head for my application or is their any other suggestions?
thanks
The head I was looking at was 185cc intake port 2.020 intake valves 1.600 exhaust 61cc combustion chamber
would this be a good head for my application or is their any other suggestions?
thanks