Anderson Cam B-31 Or B-41

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

May 26, 2014

#1

• May 26, 2014

• #1

B-3 ......218/226 .542/.542 w/ 1.6 rocker
B-31.....218/228 .544/.544 w/1.6 rocker 270/280 112 108
B-4.......224/232 .542/.563 112
B-41 ...228/236 .544/.544 w/1.6 rocker


Think I'm going to chose between these two, 363 stroker, dd, street manners are very inportant, what cha think?? AFR 185 heads, 3.55 gears, 5 spd. Anyone got some experience with these or know of a buddies set up??

 

Last edited: May 26, 2014

Reactions: 85rkyboby

RangerJoe

I leave the horn on while driving

15 Year Member

Apr 26, 2010

2,560

1,146

184

Georgia

May 26, 2014

#2

• May 26, 2014

• #2

Going with a blower?

Joe

 

tannerc91gt

This last 25% is foreign territory at this point

Founding Member

Nov 29, 1999

4,392

2,967

234

Indiana

May 26, 2014

#3

• May 26, 2014

• #3

What size blower?

 

Onefine88

Previously 89SSC18

10 Year Member

Aug 3, 2006

1,422

796

154

May 26, 2014

#4

• May 26, 2014

• #4

What they said ^^. A close friend of mine has the B31 on his weekend racer 88 hatch. Edelbrock heads, V2 S-trim, Saleen intake, 302 bottom end.
It makes around 56o to the tires and runs 10's.

 

Last edited: May 26, 2014

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

May 26, 2014

#5

• May 26, 2014

• #5

Well I've seen some good reports about it in n/a form but the adding or rather pushing the dart block with a blower, not sure of psi level yet, could be in the mix later on.

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

May 26, 2014

#6

• May 26, 2014

• #6

Latemodelrestoration.com has a lumpy idle tagged to them

 

RangerJoe

I leave the horn on while driving

15 Year Member

Apr 26, 2010

2,560

1,146

184

Georgia

May 26, 2014

#7

• May 26, 2014

• #7

Are you looking to buy new? I hate to be the custom cam guy, but if you are spending that much cash on an engine, it may be worth the extra $100. That being said, I am doing my current build with mostly used parts. I have a n41 cam and have been happy with it. I bought a n71 cam used, and was going to run it, but changed my mind. For an ots cam, anderson makes good products, and they are billet. Comp charges extra to get their $300 cams in billet.

Joe

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

May 26, 2014

#8

• May 26, 2014

• #8

The more I look at it custom keeps staring at me

 

Reactions: A5literMan

Onefine88

Previously 89SSC18

10 Year Member

Aug 3, 2006

1,422

796

154

May 26, 2014

#9

• May 26, 2014

• #9

Grabbin' Asphalt said:

Latemodelrestoration.com has a lumpy idle tagged to them

Click to expand...

Oh man "Lumpy" is cool! My Trick Flow cam is very lumpy and I love it! Nothing cooler than listening at idle to my blower whistle and cattless exhaust being shook up by a "lumpy" cam.

Its all about the cool factor to me.

 

smkshw

5 Year Member

Feb 12, 2010

1,095

235

94

May 26, 2014

#10

• May 26, 2014

• #10

my idle makes me smile every time i start it?....you want sleeper i guess?

 

Reactions: Onefine88

89oem

Mustang Master

Dec 18, 2013

1,456

542

144

May 26, 2014

#11

• May 26, 2014

• #11

Onefine88 said:

Oh man "Lumpy" is cool! My Trick Flow cam is very lumpy and I love it! Nothing cooler than listening at idle to my blower whistle and cattless exhaust being shook up by a "lumpy" cam.

Its all about the cool factor to me.

Click to expand...

coolness eghh? hmmm i think this is a lead in the 'status kill' mystery....

anyway i totally get the idle to x rpm power curve desire..... hows that play on a 331 or 363?

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

May 26, 2014

#12

• May 26, 2014

• #12

Well I have the ecam now and it's good n lopey but thats about as far as I want to go in a dd street car. They have have Fair idle labled on that one, I really don't wanna' go lopey'rrrr or any worse than that.

 

RacEoHolic330

I like to dress like a pretty girl

15 Year Member

Mar 4, 2003

4,014

1,698

203

Allentown, PA

May 26, 2014

#13

• May 26, 2014

• #13

I had a B3 on my car when it was supercharged. Definitely had a nice lope to it when the idle was set low enough.

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

May 26, 2014

#14

• May 26, 2014

• #14

When I go low idle with the ecam, the vaccum is too low on that 110* lobe

 

RacEoHolic330

I like to dress like a pretty girl

15 Year Member

Mar 4, 2003

4,014

1,698

203

Allentown, PA

May 27, 2014

#15

• May 27, 2014

• #15

I think I was pulling about 10-12" at idle with the B3.

 

89stang1

Stroked and Juiced

10 Year Member

Nov 5, 2008

730

234

74

nj

May 27, 2014

#16

• May 27, 2014

• #16

dont forget to check out Comp cams XE274HR im running a custom NX274HR i love it great torque & power yeah its lumpy but i think you will get use to it

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

May 27, 2014

#17

• May 27, 2014

• #17

What do you know about the xe270hr-12 or xe270hr-14??

 

Last edited: May 27, 2014

89stang1

Stroked and Juiced

10 Year Member

Nov 5, 2008

730

234

74

nj

May 27, 2014

#18

• May 27, 2014

• #18

XE274 is very similiar to NX274 what im running only difference mine has wider lobe separation for nos or blower both are great off the shelf stroker cams and custom grinds i dont think they charge for. The XE270 im not as familiar with but comp website has great info

 

Last edited: May 27, 2014

A5literMan

At least it is lumpy...

5 Year Member

Jul 30, 2011

4,674

2,343

194

Illinois

May 27, 2014

#19

• May 27, 2014

• #19

Why don't you contact one of the cam gurus that everyone recommends and get a custom grind? Direction I'm going in on my next build. I just wouldn't run an OTS grind in a dart block build. I would try to maximize everything I want out of it(in your case idle quality,power,and possible forced induction). Plenty of quality OTS cams out there but...

 

Reactions: tamadrummer88 and hoopty5.0