Anderson cams?

[94stroker]

Anyone ever use any of there stuff been looking for a good high rpm cam to use in my 331 project say Anderson had so but no specs on em.

 

[SQUEEZE&STROKE]

The specs are out there.


What mods do you have now.

I have used the N-91 as well as my current N-111.

No HP #'s on the n-111, as the motor is still being broken in, but my 331 with vic jr heads, vic jr manifold, N-91, holley 750 hp carb and t5 made 407 to the rear wheels.

 

[ProKiller]

i'm satisfied with mine. call up the tech line and ask some questions. excellent people to deal with.

 

[5spd GT]

I have some specs in my signature if you want to take a look.

I would call Rick Anderson and he will pick out the cam for your combination and goals.

 

[MrXCESSIVESPEED]

I agree....great people to deal with and I have been happy with the two emgines ive had their cams in. Rick knows his stuff, give him a call he will guide you in the right direction.

 

[turbogt]

I have been contemplating the b41HR

 

[Redsnk95]

Been very happy with my N91 camshaft, I have a N112 that I am about to change to.

 

[ProKiller]

i'd be interested in your thoughts on the HR cam if/when you get it. i was seriously considering put one in when i did the 331, but didn't want to spend the extra money at the time for the springs and clutch and what not.

 

[kck6894]

I have a N-111 in my car. I have never had any problems with it and have nothing but good things to say about Rick at AFM.

My car made 421rwhp last time I had it on the dyno. I'm pretty sure it makes a little more than that now with the new block.

Good luck

 

[94stroker]

What RPM dose you car make peek power at?

 

[kck6894]

What RPM dose you car make peek power at?

6800

 

[R.A.T.M.]

Seriously, do yourself a favor and spend the $325 to get a custom cam:
http://www.flowtechinduction.com/fordcams.htm