• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Annoying squeeking noise coming from the front suspension...

  • Thread starter Thread starter georgio440
  • Start date Start date Feb 6, 2008

georgio440

Member
Nov 22, 2007
195
0
17
Walnut Creek, CA
Feb 6, 2008
#1
  • Feb 6, 2008
  • #1
It's a weird squeek, as if something is dry or worn out. It occurs when going over bumps and turning the steering wheel. Also, if I'm at a stop and turn the wheel, it produces the noise. Any ideas as to what this could be? Thanks in advance.
 
R

Ryan441

Member
Nov 26, 2007
173
0
16
wintersprings, fl
Feb 6, 2008
#2
  • Feb 6, 2008
  • #2
i have the same problem, but it sounds like its from the wheel cause its only while im moving that it happens
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Feb 6, 2008
#3
  • Feb 6, 2008
  • #3
i had the same problem it was almost like a creeking sound, it turned out to be my tierods if yours have the grease fittings, grease them thats what i did
 

2000fordstanggt

Member
Sep 6, 2005
404
1
16
Westland, MI
Feb 6, 2008
#4
  • Feb 6, 2008
  • #4
the oem tie-rod ends do not have any grease fittings, only aftermarket.

i have the same problem too, btw.
 

PULMEOVR

I need a bigger E-Penis.
Sep 29, 2003
560
0
27
Ottawa, Ontario Canada
Feb 6, 2008
#5
  • Feb 6, 2008
  • #5
I also have this problem. The front suspension creaks under braking, and over some bumps. I have tried lubing the front suspension in various places, but to no avail. Anyone have any ideas? We all seem to be having the same problem. Also, I am lowered 2 inches, so obviously the suspension is under stress.
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Feb 6, 2008
#6
  • Feb 6, 2008
  • #6
you have to loosen the rubber housing around the tie rod end or cut a small slit and spray some white lithium grease in there. Presto chango
 
R

Ryan441

Member
Nov 26, 2007
173
0
16
wintersprings, fl
Feb 6, 2008
#7
  • Feb 6, 2008
  • #7
i think that ford should just make it so it dont squeek, the end
 
R

Ryan441

Member
Nov 26, 2007
173
0
16
wintersprings, fl
Feb 6, 2008
#8
  • Feb 6, 2008
  • #8
btw mine sounds like its maybe somthing w/ the brakes? when its at a slow roll it sounds like its squeeking from the driver side front wheel, idk
 

georgio440

Member
Nov 22, 2007
195
0
17
Walnut Creek, CA
Feb 7, 2008
#9
  • Feb 7, 2008
  • #9
Where exactly are the tierods located?
 

Flghtmstr1

Member
Mar 31, 2005
572
4
19
Springfield, PA
Feb 7, 2008
#10
  • Feb 7, 2008
  • #10
georgio440 said:
Where exactly are the tierods located?
Click to expand...

They are the near-horizontal bars connecting the steering rack to the spindle. They are what turn your wheels.
 
T

txmustang6933

New Member
Feb 5, 2008
5
0
0
dallas, tx
Feb 8, 2008
#11
  • Feb 8, 2008
  • #11
its the tie rod ends, ford and chevy both make those stupid lifetime fittings that they say never need greased, so they didnt put any grease fitting on them. summit sells them with grease fitting for 30 buck, but you will need an alignment once you replace them.
 
C

ceracer33

New Member
Aug 30, 2005
118
1
0
Feb 8, 2008
#12
  • Feb 8, 2008
  • #12
mine did the same thing, went to autozone and bought some with a grease fitting for $15 each. took about 30 minutes to replace both sides, make sure to make a good measurement from the old ones so that u screw the new ones back on in the exact same spot, then u wont have to get an alignment.
 

hotdog71

Member
Dec 8, 2004
427
0
16
Seattle, Eastside
Feb 8, 2008
#13
  • Feb 8, 2008
  • #13
I had the same problem the crappy OEM tie rodends were squeeking

I had them both replaced by Firestone for about $90 and now they have lifetime warranty and no squeeking
 
G

guitarpnk99

New Member
Nov 24, 2007
17
0
0
Moline, IL
Feb 10, 2008
#14
  • Feb 10, 2008
  • #14
for a cheap and quick but temporary fix have the car running and have a buddy turn the wheel from left to right and you spray some WD or soemthing similar to the tierod and all the moving joints down there and it will go away for a month or two.
 
You must log in or register to reply here.

Similar threads

A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
468
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Fox Suspensión Noise
  • PonyGTrider
  • Nov 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
402
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 8, 2026
PonyGTrider
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
92
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
320
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
733
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?