another GO FAST project.....Round 2!!!

Gearbanger 101 · Nov 30, 2009

SaleenGT2001 said:
my goal with the truck is to break into the 11's and still have AC and decent street manners

I hate to burst your bubble here, but 11's in a lowered 2WD ranger, with what's basically a warmed over 302 is never going to happen. Even with a 150 shot you're still going to come up waaaaay short. Running low-13's/ high-12's might be more realistic and even then it’s going to be a stretch!

Hell, the 2004 SVT Lightning Bolt concept only ran mid-13's and it had an Eaton blown 5.4L Lightning Engine under the hood and a worked exhaust system (est 400hp/460tq). Not to mention widened 18x12.5 wheels out back wrapped in massive 345/35ZR18's!!!

It doesn't seem to matter how much power you're throwing at them....these Rangers suffer from poor power : weight distribution. And dropping it with a set of stiff lowering springs and running 18" Saleen wheels isn't going to help traction any.

To be completely honest, you'd probably get closer to your 1/4 mile goal sticking with the 4X4. At least then you'd be able to solve that massive traction issue you're probably going to have.

deftsound · Nov 30, 2009

I have a b303 cam ill sell you cheap...pm me if your interested, i bought it for my old 94gt but ended up selling it.

SaleenGT2001 · Nov 30, 2009

Gearbanger 101 said:
I hate to burst your bubble here, but 11's in a lowered 2WD ranger, with what's basically a warmed over 302 is never going to happen. Even with a 150 shot you're still going to come up waaaaay short. Running low-13's/ high-12's might be more realistic and even then it’s going to be a stretch!

Hell, the 2004 SVT Lightning Bolt concept only ran mid-13's and it had an Eaton blown 5.4L Lightning Engine under the hood and a worked exhaust system (est 400hp/460tq). Not to mention widened 18x12.5 wheels out back wrapped in massive 345/35ZR18's!!!

It doesn't seem to matter how much power you're throwing at them....these Rangers suffer from poor power : weight distribution. And dropping it with a set of stiff lowering springs and running 18" Saleen wheels isn't going to help traction any.

To be completely honest, you'd probably get closer to your 1/4 mile goal sticking with the 4X4. At least then you'd be able to solve that massive traction issue you're probably going to have.

i'll take that as a challenge!!

if it doesnt run great at the track at least it will be fun. i will not be able to run the AC as i planned but i can live with that.

Gearbanger 101 · Nov 30, 2009

Oh, it'll be fun alright. When I was in my late -eens, early-20's my dad and I built and owned three carb'd 5.0L Rangers (1 2WD & 2 4WD) a 5.8L powered Ranger 4X4 and a Bronco II with a late model 5.0L EFI. All were great for burning the tires and impressing the masses. Hooking up is a real bitch with all that weight over the nose and none in the rear.

BurningRubber · Nov 30, 2009

A buddy of mine had a mid 90's 2wd Splash with a 302 swap (intake, nice carb, exhaust) mated to an AOD and a spooled 8.8 with 4.10's. It was lowered and had polished 16" 99-04 V6 premium wheels on it.

It was a bad ass little truck and would smoke the tires all day long. Unfortunately, some ******* kid rear ended him, totaled it, and nearly killed my buddy in the process.

SaleenGT2001 · Dec 12, 2009

got the locked 8.8 with 4.10's under the truck today. the mini spool makes tight turns different but is not noticeable at high speeds.

Gearbanger 101 · Dec 12, 2009

lotta jerking and wheel chirping taking slow, tight corners I bet?

SaleenGT2001 · Dec 12, 2009

Gearbanger 101 said:
lotta jerking and wheel chirping taking slow, tight corners I bet?

oh yea, it is interesting. i'm gonna wait till it rains tonight and find a slick parking lot for some "testing" this lil 3.0 may just draw a circle

i have already tested the mini spool in the sandy parking lot beside my house

BurningRubber · Dec 12, 2009

Nice.

I bet it was fun working in this cold ass weather... don't know if it rained for you guys up there, but it wasn't too pretty today down this way.

98COBRA281 · Dec 13, 2009

SaleenGT2001 said:
i'm gonna wait till it rains tonight and find a slick parking lot for some "testing" this lil 3.0 may just draw a circle

i dont know about the 3.0, but i know the 4.0 in my ranger with 7 inches of lift and 33's will draw a circle

SaleenGT2001 · Dec 13, 2009

BurningRubber said:
Nice.

I bet it was fun working in this cold ass weather... don't know if it rained for you guys up there, but it wasn't too pretty today down this way.

i am able to use the shop (heated and A/C) at my new job on the weekends. now i just have to put the old 7.5 back under the parts truck here at the house in the rain and cold today

Shiroelex · Dec 13, 2009

Gearbanger 101 said:
Oh, it'll be fun alright. When I was in my late -eens, early-20's my dad and I built and owned three carb'd 5.0L Rangers (1 2WD & 2 4WD) a 5.8L powered Ranger 4X4 and a Bronco II with a late model 5.0L EFI. All were great for burning the tires and impressing the masses. Hooking up is a real bitch with all that weight over the nose and none in the rear.

Been there We did a 351W in a 89 Bronco II when I was in high school, and it wasn't good for much other than burning out in a straight line. Even being lowered, it was TERRIFYING to do donuts in.

I was shocked to see the 1350 transfer case didn't outlast the 7.5" rear end being behind that power.

SallenGT2001, why no AC? I've seen it done before in the swaps, and the only modification you should have had to do was notch the corner of the heater core box out where the passenger head would interfere.

SaleenGT2001 · Dec 13, 2009

what front acc drive was used that let you keep the a/c?

i'm using a 95 stang acc drive on mine

Shiroelex · Dec 13, 2009

SaleenGT2001 said:
what front acc drive was used that let you keep the a/c?

i'm using a 95 stang acc drive on mine

We used a ton of stuff from a 96 Explorer 5.0. It was very convenient in the sense that we lifted almost everything necessary to get the engine 'into' the truck from the Explorer, mounts and all. Accessory drive, oil filter and all, it fell right in pretty much. If you didn't want to hack up your heater box on the firewall, a 2 or 3 inch body lift would let the valve cover clear it, but I'm sure you've got the other direction in mind when it comes to body height

SaleenGT2001 · Dec 26, 2009

more parts from christmas

SaleenGT2001 · Dec 26, 2009

also i just picked up this with some extra christmas cash and one hell of a sale

http://www.summitracing.com/parts/NEX-40040-10/?image=large

got some header bolts and a blaster coil as well

everything for less than $380. the nitrous kit alone retailed for $430!!

should be here in 2-3 days

d98gt · Dec 26, 2009

Who has a sale and is it still going on?

SaleenGT2001 · Dec 26, 2009

summit has the kit for $430. i got a discount code online for 10% off, had $20 summit bucks and the NX kit has a $50 mail in rebate through the end of this month

heres the link
http://www.summitracing.com/parts/NEX-40040-10/?image=large

BurningRubber · Dec 26, 2009

That is sick as hell man, awesome deal on the nitrous.

That truck isn't gonna hook for sheeeat!!!

d98gt · Dec 26, 2009

Build is getting interesting I appreciate the link and will soon be piecing a wet kit together for the s197. I'll likely use a small shot on the 98 as well once that build is finished.

Keep us updated with pictures/info

another GO FAST project.....Round 2!!!

Gearbanger 101

Straight Outta Locash

deftsound

Please ask me how much my supercharger cost

SaleenGT2001

Well-Known Member

Gearbanger 101

Straight Outta Locash

BurningRubber

SaleenGT2001

Well-Known Member

Gearbanger 101

Straight Outta Locash

SaleenGT2001

Well-Known Member

BurningRubber

98COBRA281

SaleenGT2001

Well-Known Member

Shiroelex

There's nothing worse than aut

SaleenGT2001

Well-Known Member

Shiroelex

There's nothing worse than aut

SaleenGT2001

Well-Known Member

SaleenGT2001

Well-Known Member

d98gt

SaleenGT2001

Well-Known Member

BurningRubber

d98gt

Similar threads

another GO FAST project.....Round 2!!!

Straight Outta Locash

Please ask me how much my supercharger cost

Well-Known Member

Straight Outta Locash

Well-Known Member

Straight Outta Locash

Well-Known Member

Well-Known Member

There's nothing worse than aut

Well-Known Member

There's nothing worse than aut

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency