• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

another gt40p head question

  • Thread starter Thread starter shrbrt
  • Start date Start date Dec 12, 2007
S

shrbrt

New Member
Jun 4, 2006
16
0
0
Dec 12, 2007
#1
  • Dec 12, 2007
  • #1
the junkyard near me has a $49 all you carry on the american cars. well I struck gold. I got a set of gt40p heads and the upper and lower intake manifold off an awd explorer. all this for $51. (it cost 2 bucks to enter the yard). My question is, should I have anything done to them before installing? what about changing springs. I got a stock setup with an ecam and 70mm tb. I plan on keeping the 19lb injectors. would that be sufficient, or should I switch to 24's? the explorer came with 19's
 

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
Dec 12, 2007
#2
  • Dec 12, 2007
  • #2
For the GT40p's I believe you need different headers because of the angle of the spark plugs.

BUt as what you should do to the heads...I would bring them to a head shop and have them clean, magnaflux, resurface and regrind the valve seats, but thats me.

19 lb/hr injectors should be sufficient IMO
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Dec 12, 2007
#3
  • Dec 12, 2007
  • #3
OMG did you feel guilty stealing that stuff...
 

samickguy15

Member
Sep 1, 2005
404
0
16
Delavan, IL
Dec 12, 2007
#4
  • Dec 12, 2007
  • #4
You suck!

Clean them up, put in new springs, and slap it all on.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Dec 12, 2007
#5
  • Dec 12, 2007
  • #5
87foxstang said:
For the GT40p's I believe you need different headers because of the angle of the spark plugs.

BUt as what you should do to the heads...I would bring them to a head shop and have them clean, magnaflux, resurface and regrind the valve seats, but thats me.

19 lb/hr injectors should be sufficient IMO
Click to expand...

Agreed. I would also have the springs swapped out. I did mine myself and put the trickflow spring kit on them.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Dec 12, 2007
#6
  • Dec 12, 2007
  • #6
Have a machine shop check them over for you most reputable shops will go over them and install your springs and new seals for like $50.00. Crane makes a kit #44308 that has springs,retainers and locks that will give you a .550 lift tolerance they cost $120.00. You will also need to swap out your headers or get a set of shorty plugs and good wires with thermal boots. Your 19's will work!!
 

93GTosu

Member
May 5, 2005
183
0
19
Dec 12, 2007
#7
  • Dec 12, 2007
  • #7
shrbrt said:
the junkyard near me has a $49 all you carry on the american cars. well I struck gold. I got a set of gt40p heads and the upper and lower intake manifold off an awd explorer. all this for $51. (it cost 2 bucks to enter the yard).
Click to expand...

all you can carry?! they obviously didnt mean in one trip did they? or do you have like 8 arms?!?

VERY lucky find! one of the best ive heard!

19lbs are working for me right now, but like (above) said change those springs asap. I had a local engine shop look them over, check for cracks, clean them up, valve job, and put springs on for me.

I told them to find me a set of springs and i ended up with a set of Lunati springs for a decent deal (right around trick flow and everyone elses).
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Dec 12, 2007
#8
  • Dec 12, 2007
  • #8
wow that is like at least 150lbs of stuff. does all you can carry count a wheel barrow or back pack?
 
S

shrbrt

New Member
Jun 4, 2006
16
0
0
Dec 12, 2007
#9
  • Dec 12, 2007
  • #9
all you can carry means what you can fit in a wheel barrow
 
You must log in or register to reply here.

Similar threads

Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
I
Engine Explorer GT40 Intake & Heads
  • Iceman1998
  • Mar 14, 2024
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 16, 2024
86HO5.0
8
Engine GT40P questions and advice
  • sav22rem22
  • Mar 11, 2023
  • Fox 5.0 Mustang Tech
Replies
13
Views
4K
Fox 5.0 Mustang Tech Mar 31, 2023
sav22rem22
T
Engine GT40 Heads + Cam Help
  • Tancalhan
  • Jun 4, 2021
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
8K
Fox 5.0 Mustang Tech Jun 7, 2021
Dan02gt
P
4 Hole Bosch Injectors max HP and Tune -4.6 PI
  • Png1978
  • Jul 23, 2022
  • SN95 4.6L Mustang Tech
Replies
1
Views
3K
SN95 4.6L Mustang Tech Aug 10, 2022
Chipss36
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?