Any opinions on this gauge pod setup?

1991notchbackLX · Nov 29, 2009

I just bought this gauge pod for my 1999 GT used on ebay. Any opinions or feedback floating around out there on this setup? I've never seen it before now, who makes it or made it? All info is welcome, thanks!

Chris

clrgt · Nov 29, 2009

wish i could tell ya but are you sure you want to screw into your dash

1991notchbackLX · Nov 29, 2009

If I wasn't sure I wouldn't have bought it. I'm not too worried about it, honestly. This car is already Frankenstein's monster, if you saw my other thread...

clrgt · Nov 29, 2009

no didnt see it but either way the car looks awsome and the gauge pod looks good too.

deftsound · Nov 29, 2009

well i guess if you don't mind drilling a big hole in your dash it will be fine. Should look pretty good if you can get it all mounted up right...

lang williams · Nov 29, 2009

If you like it, enjoy it. I'm going to add a gauge or three but I'm thinking about an a pillar pod so I don't have to do anything to the dash. If I went with two gauges I'd get the one that replaces the speedo trim piece with a 2 gauge pod.

1991notchbackLX · Nov 29, 2009

clrgt said:
no didnt see it but either way the car looks awsome and the gauge pod looks good too.

Thanks man! Check out my other post about the 1999 GT with a snake's heart. That will explain the whole Frankenstein thing, haha.

deftsound said:
well i guess if you don't mind drilling a big hole in your dash it will be fine. Should look pretty good if you can get it all mounted up right...

I don't mind the hole if I can get some good functionality and visibility out of the gauges. It's also a different look because Ive been to a ton of shows and seen a ton of mustangs of all years, and I've never seen this particular pod before. It's not like a '99 mustang dash is a rare commodity anyway. It rains parts for these cars around here.

lang williams said:
If you like it, enjoy it. I'm going to add a gauge or three but I'm thinking about an a pillar pod so I don't have to do anything to the dash. If I went with two gauges I'd get the one that replaces the speedo trim piece with a 2 gauge pod.

I have a dual A pillar pod with an AEM UEGO wideband and boost gauge. I'll be adding a fuel pressure to the A pillar, and in this three pod I'd like to have a tach, shift light, oil pressure, and maybe water temperature.

BurningRubber · Nov 29, 2009

You can use some double sided tape (the strong stuff, not the sissy stuff... haha) or adhesive backing velcro instead of drilling into the dash.

That's a nice gauge pod.

StangYellow · Dec 2, 2009

I personally like the Flavor Flav sized tachometer screwed into the dash,..... 2 inches above the factory one in the dash.

1991notchbackLX · Dec 2, 2009

StangYellow said:
I personally like the Flavor Flav sized tachometer screwed into the dash,..... 2 inches above the factory one in the dash.

Hah, yeah, that isn't my car man. That's a file photo demonstrating how the pod would look. I'm not into the boy-racer 5" tach thing, honestly.

fshawn50 · Dec 2, 2009

BurningRubber said:
You can use some double sided tape (the strong stuff, not the sissy stuff... haha) or adhesive backing velcro instead of drilling into the dash.

That's a nice gauge pod.

Yep nice pod but still need a hole for the wiring an all?

1991notchbackLX · Dec 2, 2009

fshawn50 said:
Yep nice pod but still need a hole for the wiring an all?

On sn95's the wiring would be snaked through the clock pod hole, but on 99-04 You need to drill a small hole for the wiring to pass through.

fshawn50 · Dec 2, 2009

Thanks for clairification there on the 94-98 clocks on the dash. it's been awhile since i've been in one. even owened a 96' an totally forgot bout them.
Oo an i did check out you 99 GT Termi heart transplant an it awsome man sweet ride

Night Shifter · Dec 3, 2009

it looks pretty rad...i kinda like it...id be too scared to drill into the dash though...definatly would go with some strong double sided tape and maybe sneak the wires out back or something..

definatly different...cant wait to see pics

1991notchbackLX · Dec 3, 2009

fshawn50 said:
Thanks for clairification there on the 94-98 clocks on the dash. it's been awhile since i've been in one. even owened a 96' an totally forgot bout them.
Oo an i did check out you 99 GT Termi heart transplant an it awsome man sweet ride

Thanks man!

Night Shifter said:
it looks pretty rad...i kinda like it...id be too scared to drill into the dash though...definatly would go with some strong double sided tape and maybe sneak the wires out back or something..

definatly different...cant wait to see pics

Thanks! Yeah, I've never seen one like it before. Once I have the pod in my hands I'll check it out and see if I can avoid drilling the dash. Honestly though, I'm not scared of taking a drill to it if need be. It's a '99 GT, not a '67 Shelby. I also don't think the look of the pod would take away from the overall look of the interior anyway. Hopefully the color matches and I won't have to paint it.

mustang50v8 · Dec 4, 2009

personally i think the one the op posted is cheap and hideous.

i have a 99 mustang. i know that this doesnt mount up the windshield view.....but i wanted something that was not going to attract the attention of every ricer who pulled up next to me. it mounts in the factory cd player location and i have 3 autometer cobalt gauges in mine.

http://cgi.ebay.com/ebaymotors/94-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

1991notchbackLX · Dec 4, 2009

mustang50v8 said:
personally i think the one the op posted is cheap and hideous.

i have a 99 mustang. i know that this doesnt mount up the windshield view.....but i wanted something that was not going to attract the attention of every ricer who pulled up next to me. it mounts in the factory cd player location and i have 3 autometer cobalt gauges in mine.

http://cgi.ebay.com/ebaymotors/94-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

YOU'RE cheap and hideous! Just kidding, this thread was asking for opinions and I respect yours. I haven't received the pod yet so when it comes in the mail I'll inspect the quality and fitment and make sure it is something I want to put in my car. Thanks for your input.

Kilgore Trout · Dec 4, 2009

I cannot see the pic at work but in my opinion the cleanest ones are the ones that add a spot on the extreme left and right of the existing dash gauge bezel. Next cleanest would be the a-pillar ones but with those you are just asking to be hassled by every mad tyte racer you encounter on the street.

Ateup · Dec 4, 2009

StangYellow said:
I personally like the Flavor Flav sized tachometer screwed into the dash,..... 2 inches above the factory one in the dash.

That's some funny stuff right there.

san~man · Dec 4, 2009

I think it's pretty ugly, but that's just me.

Any opinions on this gauge pod setup?

1991notchbackLX

Active Member

clrgt

New Member

1991notchbackLX

Active Member

clrgt

New Member

deftsound

Please ask me how much my supercharger cost

lang williams

New Member

1991notchbackLX

Active Member

BurningRubber

StangYellow

1991notchbackLX

Active Member

fshawn50

Member

1991notchbackLX

Active Member

fshawn50

Member

Night Shifter

Well-Known Member

1991notchbackLX

Active Member

mustang50v8

Member

1991notchbackLX

Active Member

Kilgore Trout

Fried or Broiled ?

Ateup

Active Member

san~man

O-G

Similar threads

Any opinions on this gauge pod setup?

Active Member

New Member

Active Member

New Member

Please ask me how much my supercharger cost

New Member

Active Member

Active Member

Member

Active Member

Member

Well-Known Member

Active Member

Member

Active Member

Fried or Broiled ?

Active Member

O-G

Similar threads

Privacy & Transparency

Privacy & Transparency