• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2010 - 2014 Specific Tech

Any tweaks to adjust CAI noise?

  • Thread starter Thread starter jag989
  • Start date Start date Feb 20, 2011

jag989

New Member
Feb 20, 2011
45
1
0
Feb 20, 2011
#1
  • Feb 20, 2011
  • #1
I just finished installing a C&L intake and tune on my '11 GT and couldn't be happier with the power improvement (especially noteworthy at lower RPMs).

I definitely understand increased noise is to be expected from the intake, and I personally enjoy the louder engine as well as the "suction" noise when accelerating more than moderately.

Not so cool is a whistling, higher pitched noise I get at very specific RPMs from second gear on. At 1,500 RPM and again from 1,800 to 2,200 the whistling will reliably come from what sounds to be right next to my left foot if I give the car any gas. It's not very loud but gets pretty tiresome as the RPMs I noted above unfortunately match cruising speeds in 5th and 6th

I've checked all the connections to/on the intake and everything is completely secure. My totally uneducated assumption is that the noise is carrying through what I've outlined in the pic below (sorry for the wonderful quality, I'm not sure what it's called):



Anyone have any ideas before I start hacking at things? Should I just learn to live with it?
 
M

MyGG

New Member
May 14, 2010
60
0
0
Indiana
Feb 20, 2011
#2
  • Feb 20, 2011
  • #2
That's the noise induction tube (may not be the actual name) they added for the 2010 model. You can unplug it and cap it, or try to put more foam into the tube near the outlet in the footwell and try to drown it out a little. People have suggested taking the foam out for more noise, but I tried and it sounds like crap, so the little amount of foam makes a huge difference.
 

jag989

New Member
Feb 20, 2011
45
1
0
Feb 20, 2011
#3
  • Feb 20, 2011
  • #3
Haha, I like the term 'Noise Induction Tube', I'll have to go with that

I'll see if I can plug it up a bit for any improvement. If the only point of that tube is to bring some engine noise in to the cabin, can it be completely removed?
 

Az Pete

10 Year Member
Mar 30, 2005
711
18
49
Panama City, Fl.
Feb 20, 2011
#4
  • Feb 20, 2011
  • #4
Yes it can. Someone makes a set of caps to plug the intake itself and the firewall hole from what I remember. Or, you can make up your own. It does not hurt a thing by removing it.
 

jag989

New Member
Feb 20, 2011
45
1
0
Feb 20, 2011
#5
  • Feb 20, 2011
  • #5
That's good to know, I'll probably end up taking it out. Should clean up the engine some too.

Unfortunately, neither plugging or temporarily unseating the tube from the firewall made a difference with the whistling. May just be a characteristic of the filter I'll need to get used to. Would replacing the filter with another brand (K&N) require a re-tune or would the change in airflow be trivial enough?

Thanks for the help by the way, much appreciated.
 

Az Pete

10 Year Member
Mar 30, 2005
711
18
49
Panama City, Fl.
Feb 21, 2011
#6
  • Feb 21, 2011
  • #6
Can you hear the whistling while under the hood? If so, try placing your hand around the filter to see if you can stop the noise while in a certain position. It may just be an oddity.....you could also try repositioning the filter by spinning it to see if that makes a difference.

I would complain to the company you got it from if you cannot locate the source.
 

jag989

New Member
Feb 20, 2011
45
1
0
Feb 21, 2011
#7
  • Feb 21, 2011
  • #7
I'm fairly certain it's the filter now that the sound tube has been eliminated. I'll have a friend give it some gas while I mess around with the filter to see if we can change anything - it's definitely audible under the hood.

I've got a buddy with a 2010 using a Steeda CAI. Completely different setup obviously, but he hasn't had any complaints. If I can swallow paying for the same parts twice, I might try that failing the above.
 
S

Storm75

New Member
Jan 16, 2011
30
0
0
Feb 21, 2011
#8
  • Feb 21, 2011
  • #8
V-6 also?

Quick question, and I hope not too far off-topic: is this Noise Induction Tube also present on the V-6 models? Thanks!
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 22, 2011
#9
  • Feb 22, 2011
  • #9
jag989 said:
I'm fairly certain it's the filter now that the sound tube has been eliminated. I'll have a friend give it some gas while I mess around with the filter to see if we can change anything - it's definitely audible under the hood.

I've got a buddy with a 2010 using a Steeda CAI. Completely different setup obviously, but he hasn't had any complaints. If I can swallow paying for the same parts twice, I might try that failing the above.
Click to expand...

I love my Steeda CAI, it came with a cap for the "SOUND TUBE"..that's exactly what it's called. I dont use it though!
RC
 
M

MyGG

New Member
May 14, 2010
60
0
0
Indiana
Feb 23, 2011
#10
  • Feb 23, 2011
  • #10
"Sound Tube" Ok, but my made up name sounds cooler! Good job Ford, a missed opportunity. To the OP, check to make sure everything is tight, seated and sealed properly. Complain otherwise, and get a replacement. Don't pay twice for the same part. Don't think the V6s have them. You probably don't want to hear more V6 induction noise!
 

SkyRender

Member
Feb 11, 2011
93
1
8
Frederick, MD
Feb 23, 2011
#11
  • Feb 23, 2011
  • #11
Just change the filter. You won't need another tune.
 

jag989

New Member
Feb 20, 2011
45
1
0
Mar 1, 2011
#12
  • Mar 1, 2011
  • #12
Just to follow up on this, I ended up installing Steeda's CAI.

The noise issue is gone, however overkill the fix may have been

Looking forward to trying out Steeda's tune tonight/tomorrow
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Mar 1, 2011
#13
  • Mar 1, 2011
  • #13
jag989 said:
Just to follow up on this, I ended up installing Steeda's CAI.

The noise issue is gone, however overkill the fix may have been

Looking forward to trying out Steeda's tune tonight/tomorrow
Click to expand...

Let us know...where did you get the tune? If u need help, give Gus a call at Steeda and tell him Robert sent you.

Good Luck
RC
 

jag989

New Member
Feb 20, 2011
45
1
0
Mar 1, 2011
#14
  • Mar 1, 2011
  • #14
94GTLaserRC said:
Let us know...where did you get the tune? If u need help, give Gus a call at Steeda and tell him Robert sent you.

Good Luck
RC
Click to expand...

I actually got the tune through Gus earlier today, so good advice

I had ordered the CAI directly from Steeda a couple of days prior to that. The difference in power under 5k is phenomenal compared to the tune I had gotten elsewhere, definitely glad I contacted them.
 
R

rickisyodaddy

Member
Apr 13, 2010
85
0
6
Orlando, FL
Mar 2, 2011
#15
  • Mar 2, 2011
  • #15
I also have the Steeda intake, but with the BBR tune. The car runs amazing with this intake and MPG improved also.
 
C

Craig012488

New Member
Aug 23, 2011
3
0
0
Nov 16, 2011
#16
  • Nov 16, 2011
  • #16
i have the same problem only with a 302 intake installed and i have the 2011 gt/cs version same whistle tried adjusting everything cant find where the whistle is coming from but im certin its the cai. kind of funny same application same noise may try ebaying my cai and getting steda if all els fails
 

Blackstang2012

New Member
Nov 13, 2011
16
0
2
Delaware
Nov 16, 2011
#17
  • Nov 16, 2011
  • #17
op, what did you do with the previous intake?
 
You must log in or register to reply here.

Similar threads

B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
403
Fox 5.0 Mustang Tech May 11, 2026
keel
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
464
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
L
Engine 97 mustang gt manual weird idol when off the throttle and coasting in 3rd, 4th, or 5th
  • Lanezs
  • Jun 9, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
Any thoughts? 03 4.6 2v
  • ThatBlack4.6
  • Mar 7, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Mar 7, 2023
ThatBlack4.6
98 GT PI Swapped Engine Fires, Dies Immediately NOT PATS
  • MMccPerformance
  • Dec 2, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2010 - 2014 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?