• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Anybody else experiencing project burnout?

  • Thread starter Thread starter FoxMustangLvr
  • Start date Start date Mar 15, 2013
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
Next
First Prev 3 of 5 Next Last

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Mar 21, 2013
#41
  • Mar 21, 2013
  • #41
Our work is taking a half day because Gonzaga University is playing in the NCAA tourny today so I'll use that time to watch my parts climb out of their box and install themselves onto my car
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Apr 17, 2013
#42
  • Apr 17, 2013
  • #42
Just thought I would re visit this thread. Long story short, this project of mine has just about totally burnt me out. I'm not even sure if I want to look at the car right now...
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Apr 17, 2013
#43
  • Apr 17, 2013
  • #43
Sorry to hear that 84T. The more tricked out you get the more work and time you need for it.

I think i'm going on 7 months with this project and there is still sooooo much to do. I'm doing some straightening of the doors and trying to get everything assembled and lined up so I can start body work hopefully next week when it reaches 70 degrees out here. As I was putting in the head lights I found more cut wires that were taped together for the corner blinkers and the inner marker lights.

effn lazy PO! More electrical to do for me as if this project isn't big enough for what little time and money I have to put into it. O'well i'm going to cut some corners to get on to bigger things since my time will be greatly limited once my twin girls are born July 23rd this summer. I can do little things quietly in the garage between poop, feed and naps. Can't spray or bang out body panels with that going on. I need to make a list so I don't over look things later and start crossing them off as they slowly but surely get done.

I don't have grand plans for this car which will help. I just want a straight dentless body and decent paint that I can do by myself, reliable 300 rwhp and average interior for just cruising and that's it.
 

MikeH686

Mine is only two inches though.
10 Year Member
Oct 11, 2011
2,843
1,753
184
Waldorf, MD
Apr 17, 2013
#44
  • Apr 17, 2013
  • #44
Mines going on two years and I still don't have an intake maf and injectors hahah
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Apr 17, 2013
#45
  • Apr 17, 2013
  • #45
It's just crazy, 4 years to put the car together with a countless number of changes along the way. It seems like a never ending stream of money just pouring from my wallet, and I'm tapped out. The funny thing is that when everything is going great you couldn't be happier, and I can tell you that the smile on my face from my first trip to the track lasted almost 3 weeks.. Now with the thing not running and a never ending list of stupid problems I just don't seem to have the patience. My motor is at the machine shop being upgraded and my buddies motor is in the car for now. I don't even want to think of the bill I'll be getting from the machine shop once mine is ready. I am seriously considering parking this thing in the garage for a month or two and just letting it set, one to just mentally catch up and two so that I can financially catch up. Neither of which is particularly easy while I am going through a divorce. I'm not saying that I'm giving up by any means, I've come to far for that, but I think I'm just going to step back from all of the car stuff for a little bit..

-Nick
 

krazedstang

15 Year Member
Mar 23, 2009
670
278
104
Streamwood
Apr 17, 2013
#46
  • Apr 17, 2013
  • #46
Mine has been in my garage for the last 2 years, it first started as just putting in a Ram HDX clutch, then the throwout bearing got stuck and had to drill it out, that turned into the water pump going out, went from there to stripping out the t-stat housing. Edlebrock Performer 5.0 went on which turned into converting to MAF, bigger throttle body new seats and carpet. As of now it doesn't run and I have no interior.
 

Sharad

ALWAYS choose the V over the P!!! Wait... what?
Jan 5, 2011
1,562
480
94
Fort Myers, Florida
Apr 18, 2013
#47
  • Apr 18, 2013
  • #47
84Ttop said:
It's just crazy, 4 years to put the car together with a countless number of changes along the way. It seems like a never ending stream of money just pouring from my wallet, and I'm tapped out. The funny thing is that when everything is going great you couldn't be happier, and I can tell you that the smile on my face from my first trip to the track lasted almost 3 weeks.. Now with the thing not running and a never ending list of stupid problems I just don't seem to have the patience. My motor is at the machine shop being upgraded and my buddies motor is in the car for now. I don't even want to think of the bill I'll be getting from the machine shop once mine is ready. I am seriously considering parking this thing in the garage for a month or two and just letting it set, one to just mentally catch up and two so that I can financially catch up. Neither of which is particularly easy while I am going through a divorce. I'm not saying that I'm giving up by any means, I've come to far for that, but I think I'm just going to step back from all of the car stuff for a little bit..

-Nick
Click to expand...


I feel ya brother. Hang in there. Car or no car, it'll get better.
 
Reactions: 90lxcoupe and 84Ttop

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
Apr 18, 2013
#48
  • Apr 18, 2013
  • #48
84Ttop said:
It's just crazy, 4 years to put the car together with a countless number of changes along the way. It seems like a never ending stream of money just pouring from my wallet, and I'm tapped out. The funny thing is that when everything is going great you couldn't be happier, and I can tell you that the smile on my face from my first trip to the track lasted almost 3 weeks.. Now with the thing not running and a never ending list of stupid problems I just don't seem to have the patience. My motor is at the machine shop being upgraded and my buddies motor is in the car for now. I don't even want to think of the bill I'll be getting from the machine shop once mine is ready. I am seriously considering parking this thing in the garage for a month or two and just letting it set, one to just mentally catch up and two so that I can financially catch up. Neither of which is particularly easy while I am going through a divorce. I'm not saying that I'm giving up by any means, I've come to far for that, but I think I'm just going to step back from all of the car stuff for a little bit..

-Nick
Click to expand...

Im sorry to hear about all that. Keep your head up though, its nothing you cant handle.

Ive been there, seems endless at times. Im halfway there now. I think. I took a break from the car last week and it felt good. Between planning a wedding, looking for a new house, and the car, i put too much on my plate sometimes, but thats life sometimes.

Take a break from it like you said, and come back to it when you are ready. The car isnt going anywhere.
 
Reactions: 84Ttop

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Apr 18, 2013
#49
  • Apr 18, 2013
  • #49
Nothing wrong with stepping away for a bit. I was out of the car scene for 3 years and then just decided to tear the car apart one day.

Do what you gotta do. You'll be back. Nobody can seem to stay away from these foxes for too long.
 
Reactions: 90lxcoupe, 84Ttop, ThatBear and 1 other person

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Apr 18, 2013
#50
  • Apr 18, 2013
  • #50
I wouldn't say project burnout, since I don't consider my car a project, but things definitely don't get done as fast as they used to. I always thought having a garage would make it easier to get things done, but it just makes it easier to shut the door and procrastinate.
 
Reactions: atey950

atey950

Founding Member
Aug 5, 1999
516
60
59
Southeastern PA
Apr 18, 2013
#51
  • Apr 18, 2013
  • #51
krazedstang said:
Mine has been in my garage for the last 2 years, it first started as just putting in a Ram HDX clutch, then the throwout bearing got stuck and had to drill it out, that turned into the water pump going out, went from there to stripping out the t-stat housing. Edlebrock Performer 5.0 went on which turned into converting to MAF, bigger throttle body new seats and carpet. As of now it doesn't run and I have no interior.
Click to expand...
Yikes!! My clutch is going to need replaced soon and now in terrified!
 

krazedstang

15 Year Member
Mar 23, 2009
670
278
104
Streamwood
Apr 18, 2013
#52
  • Apr 18, 2013
  • #52
atey950 said:
Yikes!! My clutch is going to need replaced soon and now in terrified!
Click to expand...

It wasn't fun, once I got it drilled through in a couple spots I was able to chip it away and get most of it to come out at once.
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Apr 18, 2013
#53
  • Apr 18, 2013
  • #53
I appreciate the support from everyone here! Thank you..
 
Reactions: 90lxcoupe and hoopty5.0

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Apr 19, 2013
#54
  • Apr 19, 2013
  • #54
Im experiencing financial burnout, hahah. If there was a "fortunate" side of working off shore, it keeps me from spending money for a month at a time. Then I go home and spend my way out of boredom. Vicious cycle...
 

elarm1

10 Year Member
Dec 17, 2010
1,428
652
154
N.Va
Apr 19, 2013
#55
  • Apr 19, 2013
  • #55
As it was given to me...... Please read http://www.stangnet.com/mustang-forums/threads/need-some-motivation.851972/#post-8589495
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Apr 20, 2013
#56
  • Apr 20, 2013
  • #56
85_SS_302_Coupe said:
I wouldn't say project burnout, since I don't consider my car a project, but things definitely don't get done as fast as they used to. I always thought having a garage would make it easier to get things done, but it just makes it easier to shut the door and procrastinate.
Click to expand...

My project needs to be out of my garage before winter hits. Tired of my doors being frozen shut when I park my truck outside and scraping ice and snow off my windows. The garage belongs to the F-150 during the cold and the mustang will be stored at my dads shop that's an empty 3 car garage with an attached shop (my father built it). It will be my paint booth next summer as my father intended it to be for us. I'll be painting with(out) him, RIP.
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Apr 20, 2013
#57
  • Apr 20, 2013
  • #57
elarm1 said:
As it was given to me...... Please read http://www.stangnet.com/mustang-forums/threads/need-some-motivation.851972/#post-8589495
Click to expand...

Dang Elarm, that's a sick stang and it sounds great! I think my mind is made up, I need LX tails and ditch my GT covered ones.
 
Reactions: elarm1

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
Apr 22, 2013
#58
  • Apr 22, 2013
  • #58
Yup. I do from time to time.

My car is sitting in a relative's garage on stands, while i take a break. My latest hobby....saltwater reef tanks.
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Apr 23, 2013
#59
  • Apr 23, 2013
  • #59
Ive decided that while I take a break from the mustang i'll be working on my tractor ('59 Massey Ferguson 85)
 

Husky44

10 Year Member
Sep 27, 2006
865
104
74
Tacoma, WA
Apr 24, 2013
#60
  • Apr 24, 2013
  • #60
OP, and all the others who are suffering from burnout--my $.02, from having a project that's going on 10 years (my 67): Learn to walk away. Then leave it sit. You'll have a lot of days when you walk buy and feel guilty for not working on it, and some days where you feel like you just ought to unload it. Just keep walking. Eventually you'll have a day when you can't wait to get back on it--that's when you go to work!

Some have suggested another running toy--can be good or bad. Good is that it makes the times when you're not touching the the project more bearable. Bad because you just got a new project. I started modding my 95 about a week after I got it--it was supposed to by strictly a summer DD to keep me patient with the 67. Already modding the Shelby... It's a sickness.

The other advice, from someone who's on the other side of raising kids (my youngest gets married in <2 months): Sometimes you have to put hobbies on hold for family. It's GREAT when you can do hobbies with your kids. Just make sure you do it as a way to spend time with your kids, not as a way to get more time in on your car. I was pretty much out of the car business for about 15 years, until my oldest started looking at cars for himself, and found this great deal on a 67 vert....

Enjoy the family, enjoy the day, enjoy the process of working on the car when you get the time. Living life "can't waiting" sucks. I did it for too long: Can't wait until I'm out of college-can't wait until the kids are older-can't wait until I retire from the Army-can't wait until the 67 is done-can't wait... You get the idea. You end up waiting your whole life, and never living it.

OP: Good luck with your project, very sorry to hear about your dad. Congrats on the growing family! Love life.
 
Reactions: krazedstang and FoxMustangLvr
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
Next
First Prev 3 of 5 Next Last
You must log in or register to reply here.

Similar threads

Oil choice for after break in period.
  • Sask84gt
  • Feb 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 14, 2026
Praetorious
P
Opinions on a possible project car w/ pics
  • Teen'93stang5.0
  • Mar 29, 2026
  • 2.3L (N/A & Turbo) Tech
Replies
10
Views
282
2.3L (N/A & Turbo) Tech Mar 30, 2026
Teen'93stang5.0
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
129
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
570
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?