Anybody got an easy motor mount swap

nunly94gt

Founding Member
Feb 3, 2002
1,595
3
38
Mobile, Al
Im changing mine out this weekend. Once again I work at the local ford dealership, so I read what the book says....
Loosen bolts, Use a floor Jack and block of wood under oil pan, remove fan shroud, raise engine approx. 2 inches, remove mounts and reinstall new ones.

They however dont account for the headers being in the way. Does anybody have better instructions than the company that makes the frickin car.:SNSign:
 
  • Sponsors (?)


Rocking the engine from side to side (with the jack) and doing one at a time is how I've done it. No need to remove anything else, but you might have to pop the headers off if they are a problem.
 
I know, and I have help...I just wanted to make sure. Sometimes our workshop manuals are a bit shady on how the say things. ANd there was only 3 lines of procedure.

Im used to the 6.0L diesel where a 10mm and a prybar tear it all the way down!