Im changing mine out this weekend. Once again I work at the local ford dealership, so I read what the book says....
Loosen bolts, Use a floor Jack and block of wood under oil pan, remove fan shroud, raise engine approx. 2 inches, remove mounts and reinstall new ones.
They however dont account for the headers being in the way. Does anybody have better instructions than the company that makes the frickin car.:SNSign:
Loosen bolts, Use a floor Jack and block of wood under oil pan, remove fan shroud, raise engine approx. 2 inches, remove mounts and reinstall new ones.
They however dont account for the headers being in the way. Does anybody have better instructions than the company that makes the frickin car.:SNSign: