MAC'n89Blckstng Active Member Jun 11, 2003 1,012 4 36 NJ Jul 20, 2004 #1 Jul 20, 2004 #1 I have my gauge installed in my car but I have no clue which wire to splice into off the O2 sensor. I dont want to go cutting up my wires to find out, I want it to work the first time. Anybody know? Thanks, Jesse
I have my gauge installed in my car but I have no clue which wire to splice into off the O2 sensor. I dont want to go cutting up my wires to find out, I want it to work the first time. Anybody know? Thanks, Jesse
BlackFox5.0 Founding Member Aug 7, 2000 3,514 1 0 Massachusetts Jul 20, 2004 #2 Jul 20, 2004 #2 Tap Pin 49(left), or 23(right) on the EEC harness http://www.veryuseful.com/mustang/tech/engine/88-91Stang5.0EECPinout.gif
Tap Pin 49(left), or 23(right) on the EEC harness http://www.veryuseful.com/mustang/tech/engine/88-91Stang5.0EECPinout.gif
MAC'n89Blckstng Active Member Jun 11, 2003 1,012 4 36 NJ Jul 20, 2004 #3 Jul 20, 2004 #3 on that diagram, wire number 49 is a ground. and 23 isnt shown........do you mean wire 43 and 29 from the 02 sensors? Thanks, Jesse
on that diagram, wire number 49 is a ground. and 23 isnt shown........do you mean wire 43 and 29 from the 02 sensors? Thanks, Jesse
MAC'n89Blckstng Active Member Jun 11, 2003 1,012 4 36 NJ Jul 20, 2004 #4 Jul 20, 2004 #4 Never mind I got it, it was wire 43. Thanks alot man. Jesse
jrichker StangNet's favorite TOOL In Remembrance. Thank you for your contributions Mar 10, 2000 27,512 2,813 234 Dublin GA Jul 20, 2004 #5 Jul 20, 2004 #5 See See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) http://www.veryuseful.com/mustang/t...91eecPinout.gif for help on finding the right wires to check the voltage on. Look for the wire colors.
See See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) http://www.veryuseful.com/mustang/t...91eecPinout.gif for help on finding the right wires to check the voltage on. Look for the wire colors.