I am having my heads O-ringed and was wondering if this headgasket would work. Some people on other sites were telling me to use the FELPRO 9333 PT-1's. Any help on this would be greatly appreciated
Anyone ever used Felpro 1011-2 Headgaskets with O-ringed heads?
- Thread starter jbj454
- Start date
They are telling to use the 9333 because they are graphite and will seal good with the o-ring, the 1011-2 is a paper/metal gasket and will not work.
Ford Motorsport, and ROL also make a nice graphite gasket....
Ford Motorsport, and ROL also make a nice graphite gasket....
There has been a change of plans. I'm not going to O-ring the heads at this time. What would be the best head gasket to run with non o-ringed heads and block with supercharger? Copper?
We've made over 26psi with a set of the 9333 but the tube needs to be right like any gasket.
I prefer to use a 1011-1 with most street application...
I prefer to use a 1011-1 with most street application...
The 1011-1 have a stainless fire ring which is stronger, especially on a boosted motor. The 1011-2 has a copper fire ring....
Similar threads
