• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Anyone know how to put an 87-93 rear seat into an 85?

  • Thread starter Thread starter Dean85GT
  • Start date Start date Oct 22, 2005

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 22, 2005
#1
  • Oct 22, 2005
  • #1
I just picked up a black back seat from an 88 mustang hatch. The lower part of the seat is different from my 85s. My 85 just has a snap on each part of the lower. Does anyone know how to get my new seat to fit in the back. Even if anyone has a picture of the rear of an 87-93 car with the lower part of the back seat out.

Thanks.
 
8

88FoxSaleen

Founding Member
Oct 28, 2002
363
0
0
southern NH
members.cardomain.com
Oct 22, 2005
#2
  • Oct 22, 2005
  • #2
87-89 mustangs never came w/ black interiors. the black seats you have come from 90-93 mustangs (those years came w/ black interior). the bottom does mount differently as you have noticed. just remove the black fabric from the lower seat cushion by removing all the little staples that hold in onto the cushion. reistall the new black fabric over you original rear seat cushion (after you have removed your original seat fabric) & reuse all the staples to hold the cover on like it was from the factory. takes maybe 5 minutes.
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 22, 2005
#3
  • Oct 22, 2005
  • #3
so thats the best way to do it? Have you ever done it. The new seat has holes for the seatbelts to slide through. My old seat does not.
 

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
57
Ellerslie GA 31807
Oct 22, 2005
#4
  • Oct 22, 2005
  • #4
You have to get the "U" shaped brackets that the 90-93s have for the back seats. Hardest part is getting the brackets in the right location to hold the seat in the correct postion. I tried it on my 86 and the front of the seats were sitting up for some reason. I just took them out and let the seat just rest in there and the seat belts hold in, since no-one ever really rode back there.
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 22, 2005
#5
  • Oct 22, 2005
  • #5
anyone else?
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 23, 2005
#6
  • Oct 23, 2005
  • #6
ttt
 
You must log in or register to reply here.

Similar threads

Engine Crankcase vent tube “relocation”?
  • Mcmahst
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
661
Fox 5.0 Mustang Tech Dec 20, 2025
manicmechanic007
B
Taillight upgrade?
  • BeardIsRed
  • Feb 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
330
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 5, 2026
rednotch
WTB Oxford white hood, bumper and fender for LX foxbody
  • keel
  • Jan 7, 2026
  • Want to Buy
Replies
0
Views
267
Want to Buy Jan 7, 2026
keel
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
164
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
797
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?