Anyone know which clear headlights would match these corners? #KS-FR297 (PIC)

STREETFIGHTER50 · Aug 12, 2006

They have part# KS-FR297 stamped on em. Got em brand new from CL for $10 Guy totalled his '98 before he even got to install them.

View attachment 448945
View attachment 448947

STREETFIGHTER50 · Aug 15, 2006

Anyone got these?

badstang123 · Aug 15, 2006

Look on 50 resto's site and blue oval industries. They have a good selection and definately something to match those corners.

1TallMF · Aug 15, 2006

Those are the exact same corners I got with my headlight kit. I got mine from ebay (X3 racing IIRC), but they are identical to the blueovalindustries ones only cheaper
Any Cobra look-alike clear headlight would look good with these.

diablostang · Aug 15, 2006

Those are like $15 shipped on ebay.. The Cobra lights match up well. That's what I've run on my past 3 SN-95's.

BlueBleeder95 · Aug 16, 2006

i agree with 1TALLMF,got my markers on ebay also.same ones you have only blackend.x3 racing did a fine job at getting me them fast and fearless.no problems.just look on ebay and you will find ALL KINDS of lights at good prices.

STREETFIGHTER50 · Aug 21, 2006

Do the x3racing headlights have a part# KS-FR340 on them?

1TallMF · Aug 21, 2006

That is indeed the part number. They are manufactured by Eagle Eyes (in none other than Taiwan) and come with new Phillips 9007 bulbs.

illwood · Aug 21, 2006

1TallMF said:
That is indeed the part number. They are manufactured by Eagle Eyes (in none other than Taiwan) and come with new Phillips 9007 bulbs.

I'm running some of the Eagle Eyes in my Bronco. Before I put them in, I took some time and ran a bead of silicone around the edge where the lens meets the housing. The've been in there since November and were hit with some good storms and no water has creeped in yet.

1TallMF · Aug 21, 2006

illwood said:
I'm running some of the Eagle Eyes in my Bronco. Before I put them in, I took some time and ran a bead of silicone around the edge where the lens meets the housing. The've been in there since November and were hit with some good storms and no water has creeped in yet.

Great tip, I did the same thing when I put mine in, just as an added precautionary measure. Been 5 months and no leaks, I'm quite happy with them so far.

STREETFIGHTER50 · Aug 21, 2006

Good tip! U guys didn't take any pics of that did u? What specific brand silicone did u use? Get it from Home Depot, Lowes, or the local auto parts store?

1TallMF · Aug 21, 2006

I got a tube of stuff called "seal all" from the parts store. Its basically just a clear silicone that stays flexible and is chemical resistant (for any other odd jobs I may use it for), but any brand clear silicone will do. Just apply a thin bead all along the seam where the clear lense attaches to the headlight casing (you'll see the factory sealant/adhesive seeping through). Just be careful not to let it run or make a mess on your new clean lense

STREETFIGHTER50 · Aug 22, 2006

Did u do the corner lights too?

1TallMF · Aug 22, 2006

Coulda, shoulda, woulda, didn't. Its the same principle though.

Anyone know which clear headlights would match these corners? #KS-FR297 (PIC)

STREETFIGHTER50

STREETFIGHTER50

badstang123

New Member

1TallMF

New Member

Attachments

diablostang

New Member

Attachments

BlueBleeder95

New Member

STREETFIGHTER50

1TallMF

New Member

illwood

Member

1TallMF

New Member

STREETFIGHTER50

1TallMF

New Member

STREETFIGHTER50

1TallMF

New Member

Similar threads

Anyone know which clear headlights would match these corners? #KS-FR297 (PIC)

New Member

New Member

Attachments

New Member

Attachments

New Member

New Member

Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency