Anyone making over 300hp/300tq at the wheels with the stock shortblock?

[BlownStangGT]

As the title states, anyone doing it with the stock short block and ported heads/c&l intake, cams, long tubes, etc?

 

['96&'01Stang]

yes

T&J Performance built one not that long ago with ported heads and VT cams that made over 300 rwhp

 

[AutomaticWeapon]

i have 300.7hp / 311.7tq at the wheels.

stock shortblock
stock (unported) heads
Bolt-Ons
Comp cams/Comp springs
LaRocca Tune

-Mike

 

[starkie]

AutomaticWeapon is doing it without ported heads. KenB's car has been there for awhile. There are others too, check out the members pages at www.modulardepot.com

Seems to me its becoming the norm now. A year ago there were very few people in that category.

Starkie

 

[hognutz]

quite a few poeple are. ported heads, cams, longtubes, intake upgrade should get you 300hp 300lbs with a good tune.

 

[shifty4.6]

What comp cams do you have? whats the lift and how much power did they give you?

 

[AutomaticWeapon]

What comp cams do you have? whats the lift and how much power did they give you?

i have the Comp 270s, all the specs and info on them is listed here.

i picked up 25.1hp with these cams, im very happy with them.

-Mike

 

[mrvax]

i have the Comp 270s, all the specs and info on them is listed here.

i picked up 25.1hp with these cams, im very happy with them.

-Mike

Nice car Mike.
Was there any shimming involved or were the cams and springs pretty much remove/replace?

 

[AutomaticWeapon]

these cams drop right in, there was no shimming required.

-Mike

 

[lgndracer]

The link to the cams also states an intake is needed. Are we just talking a CAI, or actually changing the intake manifold?