Anyone remember that article about "CAM MASTER" in MM&FF

[Mike86Stang]

I wanted to see what kind of info I could dig up on it.
Does anyone have the contact info listed in the mag?

TIA
Mike

 

[stangbear427]

What was it about again? I've been reading cover to cover religiously for years, but this isn't ringing any bells.

 

[Mike86Stang]

There is a company that the author of Under Pressure column used to design his cam for his 331 1000+HP turbo motor. The did a small article on it, & remember it specifically but can't find the issue...

Thanks
mike

 

[tmoss]

I have the article saved, but I'm out of town. That's the one about Denny Wycoff of Arizona Speed & Marine (right?) picking cams from off the shelf that most closely match his custom cam specifying "Cam Master" program.

 

[Mike86Stang]

BINGO!!!! you got it Can you get me the info when you get back to town?

Thanks Man
Mike

 

[Dark Knight]

Motor Machine & Supply

here's the article..
the address is at the bottom

http://www.musclemustangfastfords.com/tech/0305_mmwicked/

 

[Mike86Stang]

Motor Machine & Supply

here's the article..
the address is at the bottom

http://www.musclemustangfastfords.com/tech/0305_mmwicked/

Awesome Man. Thanks