Anyone running same combo as me?

blisiecki

New Member
Aug 12, 2007
7
0
1
Im running the gt40 y303 heads with e303 cam. Stock roller rockers as of now but I have a set of 1.6rr I would like to put it. So my question is will I have piston to valve clearance issues putting on the 1.6 rr's. I also have the stock pushrods. Thanks!!
 
Yeah the ratio doesn't change, just the contact areas of the rockers...roller vs. non roller. With an E303 i believe you could even run 1.7 rockers but as always it's best to check first.